Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
Heads up, this deal has expired. Want to create a deal alert for this item?
expiredSkillful_Pickle | Staff posted Feb 23, 2026 04:05 PM
expiredSkillful_Pickle | Staff posted Feb 23, 2026 04:05 PM

Prime Members: Tilswall Electric Ultra-Light Paint Sprayer w/ 4 Nozzles (1000ml)

+ Free Shipping

$20

$55

63% off
Amazon
39 Comments 21,598 Views
Visit Amazon
Good Deal
Save
Share
Deal Details
TIANWAN via Amazon has for Prime Members: Tilswall Electric Ultra-Light Paint Sprayer w/ 4 Nozzles (1000ml) on sale for $35.99 - $16 (apply promo code JYFNORVT at checkout) = $19.99. Shipping is free.
  • Note: Promo codes are typically for one-time use and don't always apply seamlessly. If you run into this issue, refresh the page, re-enter the code, or revisit the cart page.
Thanks to staff member Skillful_Pickle for finding this deal.

Features:
  • Effortlessly assemble within seconds
  • Compatible with multiple paint types, including water-based paints such as emulsion, acrylic paints for walls and furniture, or oil-based paints including gloss, semi-gloss, and enamel finishes
  • Features three spray patterns (horizontal/vertical/elliptical) and four nozzle sizes (1.0mm/1.5mm/1.5mm/2.0mm
  • Includes: 1x spray gun, 4x nozzles, 1x viscosity cup, 1x cleaning brush, 1x cleaning needle, 5x 190-micron filter paper

Editor's Notes

Written by megakimcheelove | Staff
  • Rated 4.3 out of 5 (58 global ratings)
  • Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
  • If you're not a student, there's also a free 1-Month Amazon Prime trial available.
  • Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion. 

Original Post

Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
TIANWAN via Amazon has for Prime Members: Tilswall Electric Ultra-Light Paint Sprayer w/ 4 Nozzles (1000ml) on sale for $35.99 - $16 (apply promo code JYFNORVT at checkout) = $19.99. Shipping is free.
  • Note: Promo codes are typically for one-time use and don't always apply seamlessly. If you run into this issue, refresh the page, re-enter the code, or revisit the cart page.
Thanks to staff member Skillful_Pickle for finding this deal.

Features:
  • Effortlessly assemble within seconds
  • Compatible with multiple paint types, including water-based paints such as emulsion, acrylic paints for walls and furniture, or oil-based paints including gloss, semi-gloss, and enamel finishes
  • Features three spray patterns (horizontal/vertical/elliptical) and four nozzle sizes (1.0mm/1.5mm/1.5mm/2.0mm
  • Includes: 1x spray gun, 4x nozzles, 1x viscosity cup, 1x cleaning brush, 1x cleaning needle, 5x 190-micron filter paper

Editor's Notes

Written by megakimcheelove | Staff
  • Rated 4.3 out of 5 (58 global ratings)
  • Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
  • If you're not a student, there's also a free 1-Month Amazon Prime trial available.
  • Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion. 

Original Post

Community Voting

Deal Score
+68
Good Deal
Visit Amazon

Leave a Comment

Unregistered (You)

Top Comments

HeyGuysChrisFixHere
447 Posts
98 Reputation
I bought 2 of these last time they were on sale a few months ago for $20 and it works surprisingly well. I PlastiDip'ed my car's emblems and tail lights and didn't thin it at all even though everyone told me I had to thin it by 25%-50% or it would never work with any cheap airless sprayer. This actually produces a pretty consistent fan pattern and atomizes droplets fairly well, much better than you'd expect for its normal price of $55 anyway. The PlastiDip was nice and smooth with no orange peel effect which is easy to achieve as long as you always lay down full wet coats and don't spray light misting coats like you would with permanent paint as they require totally different methods. Obviously this is not as good/powerful/consistent-spray-pattern as a $400 Wagner or a $800 Graco but its like 80% as good for 3%-5% the price so definitely worth it to me. This just has significantly more overspray than a high quality sprayer would create. It should work decently well for most thin to medium liquids such as stains, thin paints, and maybe water based latex if you thin it with some water since latex is usually way thicker than the PlastiDip I sprayed. It sprays smooth enough for the average DIY home applications but if you need really smooth and even spray pattern for something like repainting a car then you'd probably want to get a $500-$1000 Wagner or Graco. I upgraded to the Tilswall Shark 800 which I got on another SlickDeals front page sale for $40 shortly after I got this model and the Shark 800 sprays almost equivalent to a Wagner that costs 6x the price and it comes with 3 different nozzle diameters. I repainted my entire car with permanent color match paint as well as 2K clearcoat that a local car paint shop mixed for me and I sprayed it using the Shark 800 with smallest nozzle and it turned out very nice. It just doesn't have as much adjustability to vary the air output or fan width as a Graco has, but it was definitely good enough to give me a finish that looks OEM and I did it with a $40 sprayer lol! I'll bet this $20 one could probably do it too but it would leave a few noticeable droplets here and there that you'd have to sand out between coats. It would also take maybe 1/3 longer since this one has a smaller fan spray width than the Shark 800 does.
Dr. J
39373 Posts
5546 Reputation
I wouldn't suggest it.

I don't have this exact model but I have one that's similar (Vonforn) meaning same venturi-style sprayer. These type of sprayers (HVLP) work by forcing air at high speed past a nozzle which using the venturi effect, suctions paint from the cup and forces it through a nozzle to disperse it. The key to using this style of sprayer is getting the viscosity right - too thick (e.g. right out of the can) and you'll get spatter. Too thin and it will run. That's why most of these will include a DIN cup for measuring viscosity.

I used one of these for a bedroom, but getting the viscosity right was a pain in the ass, and refilling the cup many times was a hassle too. Because these use air to convey the paint, they're prone to the nozzle clogging from dried paint, which is yet another hassle to clean.

Perhaps the biggest hassle is prep. You WILL get overspray. There's no way around it. Even if you don't go spraying willy nilly everywhere, you'll get paint settling everywhere in the room. It will probably take you more time to get this setup than it's worth.

Lastly, the main issue with spraying interior walls is that should they ever need touchup, there's no way you'll match the texture of spray with a brush or roller. That's why most pros will basically just use the sprayer to get paint on the walls and have a second person back rolling the entire job to get a more even application but also to set the texture.

After this type of model I moved up to a prosumer version (Wagner 130). It's a bit better in that you don't have to thin the paint, but the lack of being able to control pressure (at all) means if you get tailing, you then need to modify the viscosity, which is basically the entire reason for getting a pressure unit. Then there's cleanup, and of course all the same overspray problems.

Sorry for the dissertation but IMHO paint sprayers aren't as useful for indoor painting as you'd think - maybe if you have to prime or paint ceilings in a very large multiple room area, but certainly not for single room applications. Probably the best application for sprayers like these (cheap HVLP) are small furniture projects and maybe fences or decks (if you can tolerate overspray and refilling the cup constantly).
Tt2chain
6 Posts
10 Reputation
I like your YT videos

39 Comments

Sign up for a Slickdeals account to remove this ad.

Feb 23, 2026 04:41 PM
946 Posts
Joined Nov 2012
darksiderisingFeb 23, 2026 04:41 PM
946 Posts
Low quantity of reviews and all the product images being AI or CG renderings doesn't give confidence in this being a quality product.
1
3
Feb 23, 2026 07:03 PM
70 Posts
Joined Dec 2025
BoastfulStar900Feb 23, 2026 07:03 PM
70 Posts
Quote from darksiderising :
Low quantity of reviews and all the product images being AI or CG renderings doesn't give confidence in this being a quality product.
That's disappointing.
2
Pro
Feb 24, 2026 02:46 AM
1,853 Posts
Joined Dec 2007
AssaultLife
Pro
Feb 24, 2026 02:46 AM
1,853 Posts
Would this work for fence staining
Feb 24, 2026 03:53 AM
264 Posts
Joined Jul 2012
tul9033Feb 24, 2026 03:53 AM
264 Posts
Quote from AssaultLife :
Would this work for fence staining
Yes, shouldn't be a problem. There is a consistency cup to get the thickness right.
Feb 24, 2026 05:31 AM
4,154 Posts
Joined Mar 2015
CoolDealFinderFeb 24, 2026 05:31 AM
4,154 Posts
Quote from AssaultLife :
Would this work for fence staining
Exactly my question!
Feb 24, 2026 05:56 AM
4 Posts
Joined May 2019
Dama417Feb 24, 2026 05:56 AM
4 Posts

Our community has rated this post as helpful. If you agree, why not thank Dama417

I wonder if this well worked for DIY small beater car
1
Feb 24, 2026 06:26 AM
447 Posts
Joined Oct 2017
HeyGuysChrisFixHereFeb 24, 2026 06:26 AM
447 Posts

Our community has rated this post as helpful. If you agree, why not thank HeyGuysChrisFixHere

Quote from AssaultLife :
Would this work for fence staining
I bought 2 of these last time they were on sale a few months ago for $20 and it works surprisingly well. I PlastiDip'ed my car's emblems and tail lights and didn't thin it at all even though everyone told me I had to thin it by 25%-50% or it would never work with any cheap airless sprayer. This actually produces a pretty consistent fan pattern and atomizes droplets fairly well, much better than you'd expect for its normal price of $55 anyway. The PlastiDip was nice and smooth with no orange peel effect which is easy to achieve as long as you always lay down full wet coats and don't spray light misting coats like you would with permanent paint as they require totally different methods. Obviously this is not as good/powerful/consistent-spray-pattern as a $400 Wagner or a $800 Graco but its like 80% as good for 3%-5% the price so definitely worth it to me. This just has significantly more overspray than a high quality sprayer would create. It should work decently well for most thin to medium liquids such as stains, thin paints, and maybe water based latex if you thin it with some water since latex is usually way thicker than the PlastiDip I sprayed. It sprays smooth enough for the average DIY home applications but if you need really smooth and even spray pattern for something like repainting a car then you'd probably want to get a $500-$1000 Wagner or Graco. I upgraded to the Tilswall Shark 800 which I got on another SlickDeals front page sale for $40 shortly after I got this model and the Shark 800 sprays almost equivalent to a Wagner that costs 6x the price and it comes with 3 different nozzle diameters. I repainted my entire car with permanent color match paint as well as 2K clearcoat that a local car paint shop mixed for me and I sprayed it using the Shark 800 with smallest nozzle and it turned out very nice. It just doesn't have as much adjustability to vary the air output or fan width as a Graco has, but it was definitely good enough to give me a finish that looks OEM and I did it with a $40 sprayer lol! I'll bet this $20 one could probably do it too but it would leave a few noticeable droplets here and there that you'd have to sand out between coats. It would also take maybe 1/3 longer since this one has a smaller fan spray width than the Shark 800 does.
9

Sign up for a Slickdeals account to remove this ad.

Feb 25, 2026 12:07 AM
104 Posts
Joined Oct 2004
imbatman1982Feb 25, 2026 12:07 AM
104 Posts
I bought one last time and have used it once. It worked pretty good especially for the price. It is really loud though.
Feb 25, 2026 12:07 AM
1,029 Posts
Joined Feb 2010
ZenNutsFeb 25, 2026 12:07 AM
1,029 Posts
Bought something similar to paint a louver door.

I thinned the paint plus I added flow-enhancing additive to be on the safe side. It works fine but the head get very hot and I had to take breaks even though it's only one regular sized door. With stain you may not even have to thin it. Just take it slow and you should be fine. The price is almost use once and done but I cleaned mine well and am holding on to it for the next project.

I probably wont' use something like this for big job like wall painting for small projects it's fine.
Feb 25, 2026 12:59 AM
1,173 Posts
Joined Apr 2023
IndigoTent3072Feb 25, 2026 12:59 AM
1,173 Posts
I'm seeing the 600 ml size for $35 and the 1000 ml size for $55
1
Feb 25, 2026 03:44 AM
6 Posts
Joined Nov 2008
Tt2chainFeb 25, 2026 03:44 AM
6 Posts
Quote from HeyGuysChrisFixHere :
I bought 2 of these last time they were on sale a few months ago for $20 and it works surprisingly well. I PlastiDip'ed my car's emblems and tail lights and didn't thin it at all even though everyone told me I had to thin it by 25%-50% or it would never work with any cheap airless sprayer. This actually produces a pretty consistent fan pattern and atomizes droplets fairly well, much better than you'd expect for its normal price of $55 anyway. The PlastiDip was nice and smooth with no orange peel effect which is easy to achieve as long as you always lay down full wet coats and don't spray light misting coats like you would with permanent paint as they require totally different methods. Obviously this is not as good/powerful/consistent-spray-pattern as a $400 Wagner or a $800 Graco but its like 80% as good for 3%-5% the price so definitely worth it to me. This just has significantly more overspray than a high quality sprayer would create. It should work decently well for most thin to medium liquids such as stains, thin paints, and maybe water based latex if you thin it with some water since latex is usually way thicker than the PlastiDip I sprayed. It sprays smooth enough for the average DIY home applications but if you need really smooth and even spray pattern for something like repainting a car then you'd probably want to get a $500-$1000 Wagner or Graco. I upgraded to the Tilswall Shark 800 which I got on another SlickDeals front page sale for $40 shortly after I got this model and the Shark 800 sprays almost equivalent to a Wagner that costs 6x the price and it comes with 3 different nozzle diameters. I repainted my entire car with permanent color match paint as well as 2K clearcoat that a local car paint shop mixed for me and I sprayed it using the Shark 800 with smallest nozzle and it turned out very nice. It just doesn't have as much adjustability to vary the air output or fan width as a Graco has, but it was definitely good enough to give me a finish that looks OEM and I did it with a $40 sprayer lol! I'll bet this $20 one could probably do it too but it would leave a few noticeable droplets here and there that you'd have to sand out between coats. It would also take maybe 1/3 longer since this one has a smaller fan spray width than the Shark 800 does.
I like your YT videos
Feb 25, 2026 06:29 AM
19 Posts
Joined Mar 2017
cbrulee818Feb 25, 2026 06:29 AM
19 Posts
Was thinking of getting one of these to try spraying chocolate onto my baked sculptures.
1
1
Feb 25, 2026 09:05 AM
213 Posts
Joined Jun 2008
mad212Feb 25, 2026 09:05 AM
213 Posts
Quote from HeyGuysChrisFixHere :
I bought 2 of these last time they were on sale a few months ago for $20 and it works surprisingly well. I PlastiDip'ed my car's emblems and tail lights and didn't thin it at all even though everyone told me I had to thin it by 25%-50% or it would never work with any cheap airless sprayer. This actually produces a pretty consistent fan pattern and atomizes droplets fairly well, much better than you'd expect for its normal price of $55 anyway. The PlastiDip was nice and smooth with no orange peel effect which is easy to achieve as long as you always lay down full wet coats and don't spray light misting coats like you would with permanent paint as they require totally different methods. Obviously this is not as good/powerful/consistent-spray-pattern as a $400 Wagner or a $800 Graco but its like 80% as good for 3%-5% the price so definitely worth it to me. This just has significantly more overspray than a high quality sprayer would create. It should work decently well for most thin to medium liquids such as stains, thin paints, and maybe water based latex if you thin it with some water since latex is usually way thicker than the PlastiDip I sprayed. It sprays smooth enough for the average DIY home applications but if you need really smooth and even spray pattern for something like repainting a car then you'd probably want to get a $500-$1000 Wagner or Graco. I upgraded to the Tilswall Shark 800 which I got on another SlickDeals front page sale for $40 shortly after I got this model and the Shark 800 sprays almost equivalent to a Wagner that costs 6x the price and it comes with 3 different nozzle diameters. I repainted my entire car with permanent color match paint as well as 2K clearcoat that a local car paint shop mixed for me and I sprayed it using the Shark 800 with smallest nozzle and it turned out very nice. It just doesn't have as much adjustability to vary the air output or fan width as a Graco has, but it was definitely good enough to give me a finish that looks OEM and I did it with a $40 sprayer lol! I'll bet this $20 one could probably do it too but it would leave a few noticeable droplets here and there that you'd have to sand out between coats. It would also take maybe 1/3 longer since this one has a smaller fan spray width than the Shark 800 does.
Did you use the plastidip in the gallon can and what size tip did you use?
Last edited by mad212 February 25, 2026 at 02:10 AM.
Feb 25, 2026 01:38 PM
161 Posts
Joined Nov 2007
Maliki2Feb 25, 2026 01:38 PM
161 Posts
Would this work for redoing our teens bedroom. She messed it up pretty bad and I'm looking for something easy to paint with.

Sign up for a Slickdeals account to remove this ad.

Feb 25, 2026 02:43 PM
318 Posts
Joined Feb 2018
JarredS8454Feb 25, 2026 02:43 PM
318 Posts
Quote from Maliki2 :
Would this work for redoing our teens bedroom. She messed it up pretty bad and I'm looking for something easy to paint with.
Probably, but indoors spraying means you need to tape off and protect other surfaces well.
I did my research on these cheap sprayers and I saw a lot of "overspray" comments. Additionally the reservoir is relatively small so expect a lot of refills for any sized bedroom vs say a cabinet door.
They also don't last long so like one commenter said, you might treat this as a disposable tool. I
1

Leave a Comment

Unregistered (You)

Popular Deals

Trending Deals