Midea America Corp. via Walmart has
Midea 12000 BTU Smart Inverter U-Shaped Window Air Conditioner (Restored, RMW12SQW) for
$259.99.
Shipping is free.
Thanks to community member
Lucasizq for finding this deal.
About this item:
- Smart Control: This Midea window air conditioner is Wi-Fi enabled and can be controlled from anywhere through the cloud using the MSmartHome App for iOS and Android.
- Quiet Operation: With the U-shaped design, any noise coming from the compressor, stays outside! This allows for ultra-quiet operation as low as 39 dBA*- almost as quiet as a library!
- Window Opened or Window Closed? : With it's innovative U-shaped groove design and unique drop-in install method, you may open your window to enjoy fresh air even with your window air conditioner still installed.
- Remote Control: With the Midea-U window air conditioner, a remote control is included, ensuring your comfort and convenience remains a priority
- Voice Control: This unit has voice control options available with Alexa and Google Assistant devices
- 3-Step Quick & Easy Installation: Installation can be done in 3 simple steps: install the (included) quick-snap bracket, set the unit on the bracket, and secure the sidearms. The included bracket improves the unit support beyond what a traditional window air conditioner can offer. The unique design allows the window to open and close and the unit to remain secure. The window is secured by an anti-theft mechanism while closed.
Top Comments
These U-Shaped units are pretty much used year-round around here. I have to clean them about every 6 months. All I use is the portable pressure washer gun and some disinfecting/cleaning spray. Usually Spray-Nine, or some foaming evaporator cleaner. The only thing I take apart is the wire grate and the deflector vanes. The wire grate goes in the trash with the first cleaning. Removing the fins/vanes is not totally necessary, but it does make things much easier. I would never even consider taking out the blower wheel. I did it once, and that was enough for me.
I spray the wheel down with cleaner while rotating it slowly with a wooden skewer until it is fully covered. Then I wait a couple of minutes to let it do it's thing to loosen up the filth. Then while holding the wheel steady, I use the pressure sprayer to blast all that crap off the wheel and let it run down the back of the evaporator. Unless its really bad, you don't even really need the cleaner. It's mainly to help kill the odors and provides some residual protection. I do spray the wheel again with the cleaning agent after blasting the crud (for the same reason).
The whole process can be completed while the unit is in the window if you put down a plastic bin and some towels to catch the over spray. You do need a large hole on the back of the unit to let the water drain out. You can use the same method to clean the evaporator and the condenser too. You can finish the complete system cleaning in less than 30 minutes!
I use a Fanttick pressure washer I got from Costco for $35 on clearance. It's really the only job that this thing does well! They're long gone from Costco, but you can still find them. I recently started using another unit from Amazon that works even better. In a pinch, you could use a Water-Pik type device, but it will take much longer. A $10 unit from Amazon will get the job done eventually.
Fanttik NB8 Flip Portable Pressure Washer Gu [amazon.com]n
Port A Blaster HVAC Coil Cleaning [amazon.com]
Some Pictures of the results. Sorry there are no before pics of blower. I can assure you they were stomach-turning though! I've seen it so bad you can hardly tell its supposed to be blue!
I should really do a YouTube video showing the process. So many people are struggling needlessly in trying to clean these things!
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
35 Comments
Sign up for a Slickdeals account to remove this ad.
I use a battery powered hand-held pressure washer, it's a 5 minute job. A Water-Pik also works great, though quite a bit slower.
Or maybe you don't live somewhere humid and it really was fine, I dunno. I'm just saying, my experience is absolutely not abnormal and the youtube comments attest to that.
Sign up for a Slickdeals account to remove this ad.
You were well within the 24 month warranty, why didn't they replace the unit?
Just an FYI. I'm sure I just got unlucky, but definitely follow the instructions to make sure they didn't forget to include something.
I suspect that person isn't even talking about the same thing, because as somebody else on here noted, just gaining access to the fan is a 20 minute job, more like 60 if it's your first time.
Our community has rated this post as helpful. If you agree, why not thank
Or maybe you don't live somewhere humid and it really was fine, I dunno. I'm just saying, my experience is absolutely not abnormal and the youtube comments attest to that.
These U-Shaped units are pretty much used year-round around here. I have to clean them about every 6 months. All I use is the portable pressure washer gun and some disinfecting/cleaning spray. Usually Spray-Nine, or some foaming evaporator cleaner. The only thing I take apart is the wire grate and the deflector vanes. The wire grate goes in the trash with the first cleaning. Removing the fins/vanes is not totally necessary, but it does make things much easier. I would never even consider taking out the blower wheel. I did it once, and that was enough for me.
I spray the wheel down with cleaner while rotating it slowly with a wooden skewer until it is fully covered. Then I wait a couple of minutes to let it do it's thing to loosen up the filth. Then while holding the wheel steady, I use the pressure sprayer to blast all that crap off the wheel and let it run down the back of the evaporator. Unless its really bad, you don't even really need the cleaner. It's mainly to help kill the odors and provides some residual protection. I do spray the wheel again with the cleaning agent after blasting the crud (for the same reason).
The whole process can be completed while the unit is in the window if you put down a plastic bin and some towels to catch the over spray. You do need a large hole on the back of the unit to let the water drain out. You can use the same method to clean the evaporator and the condenser too. You can finish the complete system cleaning in less than 30 minutes!
I use a Fanttick pressure washer I got from Costco for $35 on clearance. It's really the only job that this thing does well! They're long gone from Costco, but you can still find them. I recently started using another unit from Amazon that works even better. In a pinch, you could use a Water-Pik type device, but it will take much longer. A $10 unit from Amazon will get the job done eventually.
Fanttik NB8 Flip Portable Pressure Washer Gu [amazon.com]n
Port A Blaster HVAC Coil Cleaning [amazon.com]
Some Pictures of the results. Sorry there are no before pics of blower. I can assure you they were stomach-turning though! I've seen it so bad you can hardly tell its supposed to be blue!
I should really do a YouTube video showing the process. So many people are struggling needlessly in trying to clean these things!
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!