Slickdeals is community-supported. We may get paid by brands or deals, including promoted items.

Slickdeals Forums Hot Deals 5x 0.5 Litre Bottles of Creality 3D Printer Resin (Standard Rigid Resin, 405nm) $11/Bottle $55

Search This Thread First Unread

Forum Thread

5x 0.5 Litre Bottles of Creality 3D Printer Resin (Standard Rigid Resin, 405nm) $11/Bottle $55

$55.00

+6 Deal Score

5,202 Views 5 Comments

Creality currently has an offer for 5 bottles of their SLA 3d printer resin for $55. So $11 per bottle or $22 per litre, compared to about $29 per litre if you buy the Creality resin on Amazon.
It works with all resin printers from other manufacturers like Elegoo, Anycubic etc. too of course, not just with the Creality ones.

There are three options available, each one contains 5x 0.5 litre bottles:
5x Gray
or 5x Transparentg
or 2x Gray + 1x Black + 1x Transparent + 1x Flesh (for miniatures/painting)

For 405nm UV printers
Low odor
Rapid curing
Density 1.14g/cm3
Viscosity 300-400cps
Hardness 85-90D
Tensile strength 60-68Mpa
Shelf Life 12 month
Elongation 9-12%

Shipping is free.

https://www.creality3dofficial.co...er-resin-5

5x 0.5 Litre Bottles of Creality 3D Printer Resin (Standard Rigid Resin, 405nm) $11/Bottle $55

Get Deal at Retailer

Good Deal?

Add Comment

Created 04-17-2022 at 06:02 PM by doubletoaster

in 3D Printers (3)

If you purchase something through a post on our site, Slickdeals may get a small share of the sale.

Deal
Score +6

5,202 Views

5 Comments

$55.00

Get Deal at Retailer

5 Comments

View Forum Thread

Your comment cannot be blank.

jcan

Joined Jun 2006

L1: Learner

14 Posts

10 Reputation

jcan

04-17-2022 at 06:40 PM.

Pulled the trigger on the variety pack.

Funny

Helpful

Not helpful

cd85233

Joined Nov 2011

L3: Novice

332 Posts

110 Reputation

cd85233

04-20-2022 at 09:34 PM.

I have a hard time buying during the sales since you can get a kg for $25 delivered next day. Or is my math wrong here?

Funny

Helpful

Not helpful

DCGorman

Joined May 2021

L3: Novice

123 Posts

82 Reputation

DCGorman

05-03-2022 at 11:03 PM.

Can anyone attest to the quality of this resin? I'm new to resin and want to be sure I'm not wasting my money.

Funny

Helpful

Not helpful

WhoKnowsWho2

Joined Jan 2018

L2: Beginner

50 Posts

46 Reputation

WhoKnowsWho2

08-23-2022 at 11:18 AM.

Quote from DCGorman

Can anyone attest to the quality of this resin? I'm new to resin and want to be sure I'm not wasting my money.

If the deal comes up again, hard pass. I picked some up after reading reviews about it being tough to clean and sticky. Yeah, this stuff sucks. Tried exposure settings from 1.6s to 2.6 on a Photon Mono, residue takes forever to clean vs the stuff I've used before from elegoo, anycubic, and rich-opto, even with a tooth brush, spray bottle, and wash and cure station. Support failures often with this stuff too, switched back to rich-opto with the same supports and other settings at 1.8s exposure and works perfectly fine.