Original Post
Written by
Edited January 12, 2024
at 04:52 PM
by
It is a budget 4U 12 bay server chassis. Seems to be lowest price I can find maybe historic low too. $249.99 more than $100 off MSRP
Rosewill RSV-L4412U 4U Server Chassis Rackmount Case | 12 Hot Swap 3.5", 2.5" SATA I, SATA II, SATA III SAS | E-ATX Compatible | 3 Front 120mm Fans, 2 Rear 80mm Fans | USB 3.0 2.0 | Front Panel Lock
https://www.newegg.com/rosewill-r...6811147330 NLA
https://www.walmart.com/ip/Rosewi.../953095928 NLA
Looks like other chassis are on sale too, so look for Rosewill chassis
$120
Rosewill RSV-L4500U 4U Server Chassis Rackmount Case | 15 3.5" HDD Bays | E-ATX Compatible | 6 Front 120mm Fans, 2 Rear 80mm Fans | USB 3.0, USB 2.0 | Front Panel Lock and Key | Silver/Black [walmart.com]
$90
Rosewill RSV-Z2600U 2U Server Chassis Rackmount Case | 4 3.5" HDD Bays | Micro-ATX Compatible |3 80mm Fans | USB 3.0, USB 2.0 | Silver/Black [walmart.com]
$120
Rosewill RSV-R4000U 4U Server Chassis Rackmount Case | 8 3.5" HDD Bays, 3 5.25" Devices | ATX, CEB Compatible | 2 Front 120mm Fans, 2 Rear 80mm Fans | USB 3.0, 2.0 | Front Panel Lock | Silver/Black [walmart.com]
43 Comments
Your comment cannot be blank.
Sign up for a Slickdeals account to remove this ad.
Do you know what connector the backplane uses? I have a spare Perc H310 that I believe uses SFF-8087. It looks like fitting a 360 AIO cooler in this would be pretty trivial too.
I have a few Dell poweredge 12th Gen servers which are insanely cheap, but I wanted this case so I could eventually switch to a more standard form factor, as those servers are pushing over 10 years old now. The only gripe I can see is this chassis has practically doubled in price since Covid, oh well can't go back now.
Thanks again!
Thanks again!
Here is the manual for the cage
https://images10.newegg
Mine should be arriving tomorrow.
Was it lower than this pre-covid? I didn't see anything lower than this on CCC historical, but I've only recently started looking for server chassis.
And you're welcome.
Here is the manual for the cage
https://images10.newegg
Mine should be arriving tomorrow.
Was it lower than this pre-covid? I didn't see anything lower than this on CCC historical, but I've only recently started looking for server chassis.
And you're welcome.
I think I am mistaken, the case people on Reddit were referring to was the 4500 I believe which is significantly cheaper. From what I can find this is a pretty good price!
I think you are right in that the backplane just has 4 separate SATA ports for each cage. I was hoping it'd just be a SFF-8087 connector, but at this price point it's hard to complain.
Part of me wanted to splurge on the new 45HomeLab HL15 that just came out, but that's $800 lol. Man homelabbing can be expensive!
These don't have a "backplane" per-se you need to run SATA cables to the motherboard/HBA and PSU power to each drive.
I've got the R4000U case with 2x RSV-SATA-Cage-34 installed each with a noctua fan, 2x LSI SAS2008 9200-8i in IT mode and it works really well.
Sign up for a Slickdeals account to remove this ad.
Do you know what connector the backplane uses? I have a spare Perc H310 that I believe uses SFF-8087. It looks like fitting a 360 AIO cooler in this would be pretty trivial too.
I have a few Dell poweredge 12th Gen servers which are insanely cheap, but I wanted this case so I could eventually switch to a more standard form factor, as those servers are pushing over 10 years old now. The only gripe I can see is this chassis has practically doubled in price since Covid, oh well can't go back now.
Thanks again!
With this SATA backplane (or no backplane at all) you can only connect 4 drives per each SFF-8087 cable with a split cable.