AqaraDirect via Amazon has
Aqara Wireless 3-Way Control Button Smart Home Mini Switch on sale for
$12.59.
Shipping is free w/ Prime or on $35+ orders.
Note: An Aqara Hub is required and sold separately.
Thanks to Community Member
akvtest for finding this deal.
Features:- Aqara Wireless Mini Switch is a remote control switch with compact design and low energy consumption
- No wiring required. The minimal design allows you to place it anywhere or attach it to a surface with a sticker.
- Set single press, double press, and long press to control programmable functions, such as turning on/off a device, activating a scene, etc
- The Wireless Mini Switch can also act as an emergency button at home. When pressed, Aqara Hub will send out a push notification and sound the alarm.
- The device can also be used as a doorbell when connected to the Aqara Hub, which offers a selection of different ring tones.
53 Comments
Your comment cannot be blank.
Featured Comments
Door Lock
Light switch no neutral
Mini switch
Door/window sensor
Leak monitor
Everything just works and ties to HomeKit
I also bought m2 hub sine it was only 41 during holidays, though from what I can tell every device has its own QR code to tie directly your HomeKit so not sure it's 100% needed
I wish Eufy developers were this good with their Intergrations to homekit
Sign up for a Slickdeals account to remove this ad.
1. Check if the blue led flashes when you press the reset button - if not then, open the back cover and remove battery protection plastic sheet, looks at time it does not come out fully.
2. There are multiple edge drivers - but this one seems to be working (at least for me), if Aqara button detected as Thing then change driver once enrolled using the link in the below community post.
https://community.smart
When you put the device in pairing mode, keep clicking the pair button to keep it awake... Smart things will eventually find it. Unfortunately, mine drops out of connection every so often and you have to repair.
https://a.aliexpress.co
I'd only buy one and try it out - other 4 way zigbee switches I've bought from AliExpress turned out to suck (fails to register presses half the time). So far this one hasn't missed a press yet, but it's only been 2 days of light testing. Shows up as a TS0044 in Zigbee2MQTT. Plasticky build quality but gives a ton of functionality for the price.
I think I got it to work with ZHA before I switched over to Z2M to get a presence sensor to work (spoiler: it didn't). Others have commented the battery life is only a few months.
A note on on my experience pairing them with Sky Connect, they will attempt to go to sleep shortly after pairing and it will fail. I found that tapping the main button every couple of seconds did the trick kept it awake to complete the pairing.
Sign up for a Slickdeals account to remove this ad.
1. Check if the blue led flashes when you press the reset button - if not then, open the back cover and remove battery protection plastic sheet, looks at time it does not come out fully.
2. There are multiple edge drivers - but this one seems to be working (at least for me), if Aqara button detected as Thing then change driver once enrolled using the link in the below community post.
https://community.smart