Update: This popular deal is still available, now at the lower price of
$8.99.
RONGDAXING TECH via Amazon has for
Prime Members:
Lvetek Wall Outlet Surge Protecter w/ USB Ports (3x USB-A, 1x USB-C) on sale for $9.98 >
Now: $8.99.
Shipping is free.
Thanks to Community Member
Leo.10 for sharing this deal.
About this product:
- Multi-plug wall outlet extender has 5 outlets, plus 4 USB Ports
- USB charges 5V 4.2A shared rating
- USB A port up to 2.4A
- USB C port up to 3A MAX
- 1680 joules surge protector
- 3 complementary Surge Protection Circuits, TVS(transient voltage suppressor) MOV(metal oxide varistor) GDT(gas discharge tube) combined with fire-resistant casing (up to 1382℉)
- Can secure it on duplex outlet with screw included
- ETL Certified
Leave a Comment
Top Comments
It is advertised as being ETL certified, which is an NRTL (like UL) that is run by ITS.
https://www.osha.gov/nationally-r...rogram/its
https://www.osha.gov/nationally-r...rogram/ul/
Many arguments exist about whether UL or ETL is "better," but they are both certified testing laboratories and confirm that a product meets certain standards. (the big difference is that UL actually writes those standards, whereas ETL tends to just use them for testing)
Checking ETL's site, this brand/model is listed in the pictures (Lvetek QF-519F):
https://ramuk.intertekc
Important extract from the above webpage:
"Current taps with class 2 power unit, Model Nos. ...QF-519F..."
"A representative sample of the listed devices have been tested, investigated and found to comply with the requirements of the Standard(s) for Current Taps & Adapters (UL-498A) and are identified with the ETL Listed Mark."
Of course, all of that is assuming that the brand/model listed is genuine (fake products are fake, after all!), but that's always an issue, so YMMV.
One thing to note in the listing is that all of the USB ports are limited to 5V only, so no quick charging is supported. From the Amazon listing:
"USB Port Output: DC 5V, Total 4.8A (although this picture shows 4.2A max)
The UCB-C port doesn't support any other devices which need 9~22V charging voltage."
101 Comments
Sign up for a Slickdeals account to remove this ad.
It is advertised as being ETL certified, which is an NRTL (like UL) that is run by ITS.
https://www.osha.gov/nationally-r...rogram/its
https://www.osha.gov/nationally-r...rogram/ul/
Many arguments exist about whether UL or ETL is "better," but they are both certified testing laboratories and confirm that a product meets certain standards. (the big difference is that UL actually writes those standards, whereas ETL tends to just use them for testing)
Checking ETL's site, this brand/model is listed in the pictures (Lvetek QF-519F):
https://ramuk.intertekc
Important extract from the above webpage:
"Current taps with class 2 power unit, Model Nos. ...QF-519F..."
"A representative sample of the listed devices have been tested, investigated and found to comply with the requirements of the Standard(s) for Current Taps & Adapters (UL-498A) and are identified with the ETL Listed Mark."
Of course, all of that is assuming that the brand/model listed is genuine (fake products are fake, after all!), but that's always an issue, so YMMV.
There's a 1-star review that suggests that maybe "ETL Certified" doesn't, in this case, mean what you think it means. Curious how the listing mentions "ETL Certified" :-) "After Sale Service: ETL Certified,Our friendly and reliable customer service will respond to you within 24 hours."
1.0 out of 5 stars BEWARE! FIRE HAZARD! Flawed internal design!
Reviewed in the United States on February 7, 2024
Color: WhiteVerified Purchase
So, today when my wife plugged in her laptop there was a loud pop and a large amount of sparks from the outlet for about 2-3 seconds before the house breaker tripped. I took the unit off the wall and took it apart and found that the side outlets are basically plastic rails that are not held onto the plastic side very well at all. In these plastic rails runs a thin copper strip for each of the hot, neutral and ground. At the point where the blades of a plug are supposed to mate with the outlet the copper strip is split and formed into a rough shape of the plug blade. Unfortunately, as loose as the copper strips are if you put a plug in at a slight angle you will miss the split in the strip that the blade is supposed to go through and hit the outside of it, flexing it enough that the internal components can touch (in this case, hot to ground) causing arcing and a short. I would not use one of these - choose a better option!
and google already has everything
It is advertised as being ETL certified, which is an NRTL (like UL) that is run by ITS.
https://www.osha.gov/nationally-r...rogram/its
https://www.osha.gov/nationally-r...rogram/ul/
Many arguments exist about whether UL or ETL is "better," but they are both certified testing laboratories and confirm that a product meets certain standards. (the big difference is that UL actually writes those standards, whereas ETL tends to just use them for testing)
Checking ETL's site, this brand/model is listed in the pictures (Lvetek QF-519F):
https://ramuk.intertekc
Important extract from the above webpage:
"Current taps with class 2 power unit, Model Nos. ...QF-519F..."
"A representative sample of the listed devices have been tested, investigated and found to comply with the requirements of the Standard(s) for Current Taps & Adapters (UL-498A) and are identified with the ETL Listed Mark."
Of course, all of that is assuming that the brand/model listed is genuine (fake products are fake, after all!), but that's always an issue, so YMMV.
https://a.co/d/5SwWtWO
Sign up for a Slickdeals account to remove this ad.
5-Outlet Surge Protector Wall Charger with 4 USB Ports - 1680J Multi Plug for Home, Office, Travel
https://www.amazon.com/dp/B09BKHHL5H
Bought several long time ago. Like. Luv the extra plugs, added Cat4/5 plugs. CAVET - Will not plug into a GFCI outlets. My bathroom and kitchen counter outlet are GFCI.
I have used this on the 'down' side of the bathroom and kitchen GFCI outlets. YMMV . . Caution . . Don't if you do not know what this means. IMHO
1.0 out of 5 stars BEWARE! FIRE HAZARD! Flawed internal design!
Reviewed in the United States on February 7, 2024
Color: WhiteVerified Purchase
So, today when my wife plugged in her laptop there was a loud pop and a large amount of sparks from the outlet for about 2-3 seconds before the house breaker tripped. I took the unit off the wall and took it apart and found that the side outlets are basically plastic rails that are not held onto the plastic side very well at all. In these plastic rails runs a thin copper strip for each of the hot, neutral and ground. At the point where the blades of a plug are supposed to mate with the outlet the copper strip is split and formed into a rough shape of the plug blade. Unfortunately, as loose as the copper strips are if you put a plug in at a slight angle you will miss the split in the strip that the blade is supposed to go through and hit the outside of it, flexing it enough that the internal components can touch (in this case, hot to ground) causing arcing and a short. I would not use one of these - choose a better option!
Our community has rated this post as helpful. If you agree, why not thank obend
Each USB A provided 1.46A max. Only one, did not test 2 or 3 at the same time.
Type-C provided only 1.46A max also.
I will return it tomorrow. I have plenty of PD chargers at home.will continue to use 6 outlet splitter from Dollar Tree and PD chargers.
Sign up for a Slickdeals account to remove this ad.
Leave a Comment