Did this coupon
work for you?
work for you?
Sorry, this deal has expired.
Get notified of deals like this in the future.
Add Deal Alert for this Item
Frontpage
Shop Fox W1702-Shop Fox 3 HP Shaper Expired
$1050
$2,030.00
+ Free Shipping
Grizzly has Shop Fox W1702-Shop Fox 3 HP Shaper on sale for $1050. Shipping is free.
Thanks community member minions_web for sharing this deal
Features:
Thanks community member minions_web for sharing this deal
Features:
- Large handwheel elevates the spindle for precise control
- Spindle lock knob ensures consistent results
- T-slot miter gauge
- Magnetic switch with thermal overload protection
- Heavy cast-iron, independently adjustable, split fence allows full-edge profiling
- Built-in 3" dust port
- Large precision-ground cast-iron table
- Shielded and lubricated ball bearings
- Interchangeable spindle are easy to change
- Removable table inserts provide work support close to the cutter
Original Post
Written by
Edited May 22, 2024
at 04:40 PM
another killer deal from grizzly
Sale ends 6/3/24 (PST)
W1702 Shop Fox 3 HP Shaper
Whether edge-profiling or making door stiles, rails, and panels, this is the right machine for the job.
The full-capacity W1702 3 HP Shaper will handle the smallest profile cutters, all the way up to the largest panel cutters with its three included spindle sizes, 3" spindle travel, and 5-1/2" maximum cutter diameter capacity.
The 3 HP motor rotates the spindles at reversible speeds of 7000 and 10,000 RPM, providing the greatest flexibility for accommodating cutters of all sizes.
The cast-iron table is precision-ground and measures 28-1/4" x 30-1/2".
The two-piece cast-iron fence is independently adjustable for different cutting thicknesses and special shaping applications. It is also removable for easy replacement with a zero-clearance or other custom-made fence.
For additional length, the D4927 4" Long Spindle will allow you to use up to 3" tall cutters on the W1702.
The W1702 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.)
The W1702 manual was written by our U.S. based Tech Doc Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your shaper.
Our Customer Service and Tech Support Teams are U.S.-based. Parts for the shaper may be available online and shipped from the Woodstock parts warehouse in Springfield, MO.
Made in an ISO 9001 factory
CSA certified
SPECIFICATIONS:
Motor: 3 HP, 240V, single-phase, 12A
Maximum cutter height: 2"
Maximum cutter diameter: 5-1/2"
Spindles: 1/2", 3/4", 1"
Spindle lengths: 2-3/4", 3", 3-1/2"
Spindle capacity under nut: 2", 2-1/4", 2-1/2"
Spindle travel: 3"
Spindle speeds: 7000, 10,000 RPM
Spindle openings: 1-3/8", 2-3/4", 4", 5-1/2"
Table size: 28-1/4" W x 30-1/2" D
Floor-to-table height: 34"
Footprint: 20" x 21"
Overall dimensions: 30-1/2" W x 28-1/4" D x 39-1/2" H
Approximate shipping weight: 353 lbs.
FEATURES:
2-year warranty!!
Large handwheel elevates the spindle for precise control
Spindle lock knob ensures consistent results
T-slot miter gauge
Magnetic switch with thermal overload protection
Heavy cast-iron, independently adjustable, split fence allows full-edge profiling
Built-in 3" dust port
Large precision-ground cast-iron table
Shielded and lubricated ball bearings
Interchangeable spindle are easy to change
Removable table inserts provide work support close to the cutter
Included starting pins for freehand shaping
https://www.grizzly.com/products/...alId=kwl4z
Sale ends 6/3/24 (PST)
W1702 Shop Fox 3 HP Shaper
Whether edge-profiling or making door stiles, rails, and panels, this is the right machine for the job.
The full-capacity W1702 3 HP Shaper will handle the smallest profile cutters, all the way up to the largest panel cutters with its three included spindle sizes, 3" spindle travel, and 5-1/2" maximum cutter diameter capacity.
The 3 HP motor rotates the spindles at reversible speeds of 7000 and 10,000 RPM, providing the greatest flexibility for accommodating cutters of all sizes.
The cast-iron table is precision-ground and measures 28-1/4" x 30-1/2".
The two-piece cast-iron fence is independently adjustable for different cutting thicknesses and special shaping applications. It is also removable for easy replacement with a zero-clearance or other custom-made fence.
For additional length, the D4927 4" Long Spindle will allow you to use up to 3" tall cutters on the W1702.
The W1702 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.)
The W1702 manual was written by our U.S. based Tech Doc Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your shaper.
Our Customer Service and Tech Support Teams are U.S.-based. Parts for the shaper may be available online and shipped from the Woodstock parts warehouse in Springfield, MO.
Made in an ISO 9001 factory
CSA certified
SPECIFICATIONS:
Motor: 3 HP, 240V, single-phase, 12A
Maximum cutter height: 2"
Maximum cutter diameter: 5-1/2"
Spindles: 1/2", 3/4", 1"
Spindle lengths: 2-3/4", 3", 3-1/2"
Spindle capacity under nut: 2", 2-1/4", 2-1/2"
Spindle travel: 3"
Spindle speeds: 7000, 10,000 RPM
Spindle openings: 1-3/8", 2-3/4", 4", 5-1/2"
Table size: 28-1/4" W x 30-1/2" D
Floor-to-table height: 34"
Footprint: 20" x 21"
Overall dimensions: 30-1/2" W x 28-1/4" D x 39-1/2" H
Approximate shipping weight: 353 lbs.
FEATURES:
2-year warranty!!
Large handwheel elevates the spindle for precise control
Spindle lock knob ensures consistent results
T-slot miter gauge
Magnetic switch with thermal overload protection
Heavy cast-iron, independently adjustable, split fence allows full-edge profiling
Built-in 3" dust port
Large precision-ground cast-iron table
Shielded and lubricated ball bearings
Interchangeable spindle are easy to change
Removable table inserts provide work support close to the cutter
Included starting pins for freehand shaping
https://www.grizzly.com/products/...alId=kwl4z
in
Tools
(3)
If you purchase something through a post on our site, Slickdeals may get a small share of the sale.
21 Comments
Your comment cannot be blank.
Featured Comments
On the other hand it's a beast at over 300lb and requires a 240V circuit.
Oh you meant….
I've spent $500 on other crazy items that I haven't used yet, but I'm just not quite up to this level of slickdealism yet. The level where I could justify to myself an $1000 expenditure of such a large ,obscure, shop real estate taker upper, that I'll hardly ever use.
Believe me, I'd love this, but my woodworking skills and woodworking space just can't handle it.
Thumbs up for posting a woodworking deal though.
Sign up for a Slickdeals account to remove this ad.
For the hobbyist woodworker, the extra costs of shaper bits over router bits will make this unusable.
Not even all pro wood shops need a shaper table.
Theyre not really even extra big routers… it's a different tool for different purposes with some overlap of functionality.
My thought is to use the router bit adapter and focus on those, but where appropriate use the shaper bits for projects making picture frames, trim, etc.
(Good price though)
EDIT: BTW, if you think table saw's are dangerous, usual nick name for shaper operator is "stumpy".
BTW, it doesn't support DD-WRT.
Oh you meant….
Yes I agree but it's 1/2 off lol
BTW, it doesn't support DD-WRT.