SUNLU Industry via Amazon has
4-Pack 1kg SUNLU 1.75mm PLA 3D Printer Filament (Blue) on sale for
$34.01.
Shipping is free with Prime or on $35+ orders.
Thanks to Community Member
MG_LIFE for sharing this deal & to Community
Aemasters Member for contributing.
SUNLU Industry via Amazon has
4-Pack 1kg SUNLU 1.75mm PLA 3D Printer Filament (Yellow) on sale for
$34.82.
Shipping is free with Prime or on $35+ orders.
About this Item:
- Recommend printing at a nozzle temperature of 200-230°C, a bed temperature of 50-65°C, and a printing speed of 50-100mm/s.
- Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20".
- Dimensional Accuracy +/- 0.02mm.
Leave a Comment
15 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank Aemasters
https://www.amazon.com/dp/B0DQPJVWD3
https://www.amazon.com/dp/B0DQPJVWD3
I'm not wasting my own time and material to print tires to attach to their spools just to make them work.
I'm not wasting my own time and material to print tires to attach to their spools just to make them work.
I'm new to sunlu.
I ordered multiple rolls of sunlu black PLA recently. First roll, has had bed adhesion issues, warping prints, and has caused multiple nozzle jams.
I wound up throwing out half the spool.
Worst filament I've used so far. I'm hesitant to try the other rolls.
People seem to like sunlu, but from reviews it seems it might be luck of the draw with getting a good/bad batch.
I ordered multiple rolls of sunlu black PLA recently. First roll, has had bed adhesion issues, warping prints, and has caused multiple nozzle jams.
I wound up throwing out half the spool.
Worst filament I've used so far. I'm hesitant to try the other rolls.
People seem to like sunlu, but from reviews it seems it might be luck of the draw with getting a good/bad batch.
The outside diameter of their newer spools is smaller than most other spools on the market.
As a result the spools tend to drag on the bottom of the AMS and it keeps the rollers of the AMS from making good contact with the roll. It frequently causes issues with filament feed, especially on retraction.
In mine I've found that I can only get simply filament to work in the 1st slot of the AMS.
Sign up for a Slickdeals account to remove this ad.
I do love Sunlu filament though. Good stuff.
Sign up for a Slickdeals account to remove this ad.
Leave a Comment