Joined Jun 2003
Banned Shill
Forum Thread
(NO OT) - DIY: Inexpensive Bracket for Anyone w/Radar Detector, GPS, Scan Tool or Anything Windshield Mounted
September 12, 2012 at
01:31 PM
in
Autos
I wasn't sure where to post this since there is no DIY or How To section on SD but I've posted this 'deal' on many automotive forums that I'm on and it's always been well received. Mods: If there is someplace where this fits better feel free to relocate it there. SD needs a DIY sub-section maybe?
I made a bracket for my radar detector to mount to the rear view mirror rather than the stupid windshield brackets w/suction cups. This same device can be used for a wide variety of things such as GPS devices or engine monitor readouts. The cost is anywhere from free to $2.50 depending on if you ride bicycles or not. It's a simple seat post reflector with the reflector removed. Most have these in their garage and if not you can get them at your local bicycle shop for a few bucks at most. When I went to mine they gave me handfuls of them of various sizes for free just for asking. You will also need a small bolt with a matching washer & nut to attach the factory bracket to it. There are a couple sizes so pick based on the thickness of your mirror stem then use padded tape to make up the difference. Pretty simple actually.
I figured this is a perfect post for those Slickdealers like me who think $90 or even $35 is WAY to much for a simple mirror bracket mount.
Enjoy!
I made a bracket for my radar detector to mount to the rear view mirror rather than the stupid windshield brackets w/suction cups. This same device can be used for a wide variety of things such as GPS devices or engine monitor readouts. The cost is anywhere from free to $2.50 depending on if you ride bicycles or not. It's a simple seat post reflector with the reflector removed. Most have these in their garage and if not you can get them at your local bicycle shop for a few bucks at most. When I went to mine they gave me handfuls of them of various sizes for free just for asking. You will also need a small bolt with a matching washer & nut to attach the factory bracket to it. There are a couple sizes so pick based on the thickness of your mirror stem then use padded tape to make up the difference. Pretty simple actually.
I figured this is a perfect post for those Slickdealers like me who think $90 or even $35 is WAY to much for a simple mirror bracket mount.
Enjoy!
87 Comments
Your comment cannot be blank.
Sign up for a Slickdeals account to remove this ad.
Won't work on a Benz though (theres no space to place this) so I'm out on this one.
Come to think of it, on Chevy's, the weight of the mirror alone will bring it down.
That's Obama's baby you're talking about!
Personally I'll never own another GM product, but that's just from bad experiences... Obama being involved with GM just seals the deal for me.
Come to think of it, on Chevy's, the weight of the mirror alone will bring it down.
smithmal
Forget about those cheesy "rear view mirror repair kits". They are not what the windshield guys use.
Sign up for a Slickdeals account to remove this ad.
What he said. In CA the only legal mounts are the lower corners of the windshield. Nothing can hang from the mirror Yet more nanny-state laws .. great DIY though.
Sign up for a Slickdeals account to remove this ad.