1300-Piece Bulldog Complete Specialty Fastener Kit w/ Stackable Cases Expired

I typed up an itemized breakdown of everything in the kit, based on the product photos, for those who may have trouble reading them.

Case 1: Metal/Wood Screws
Phillips/Flat Combo Button-Head
#4 x 3/8" (20)
#4 x 1/2" (20)
#4 x 3/4" (20)
#6 x 1/2" (20)
#6 x 1" (20)
#8 x 1/2" (10)
#8 x 3/4" (10)
#10 x 3/4" (10)
Phillips Counter-Sunk Head
#4 x 1/2" (20)
#4 x 3/4" (20)
#4 x 1" (20)
#6 x 1/2" (20)
#6 x 5/8" (20)
#6 x 3/4" (20)
#6 x 1" (15)
#8 x 1/2" (15)
#8 x 3/4" (15)
#8 x 1" (15)
#10 x 1-1/4" (10)
#10 x 2" (10)

Case 2: Metric Screw, Nut, & Washer Assortment
Phillips/Flat Combo Button-Head Screws
M3 x 16mm (20)
M3 x 20mm (15)
M4 x 12mm (15)
M4 x 16mm (10)
M4 x 20mm (10)
M4 x 25mm (10)
M5 x 16mm (10)
M5 x 20mm (10)
M5 x 25mm (10)
M6 x 20mm (5)
M6 x 30mm (5)
Washers
M3 (100)
M4 (60)
M5 (50)
M6 (15)
M6 (15)
Nuts
M3 (60)
M4 (30)
M4 (20)
M5 (20)
M6 (10)

Case 3: SAE Screw, Nut, & Washer Assortment
Phillips/Flat Combo Button-Head Screws
#6 x 5/8" (40)
1/4" x 5/8" (10)
#8 x 1/2" (30)
#8 x 5/8" (20)
#8 x 3/4" (20)
#8 x 1" (10)
#10 x 3/4" (5)
#10 x 1" (5)
5/16" x 1-1/4" (5)
Washers
#6 (50)
1/4" (20)
#8 (40)
#10 (30)
5/16" (20)
Nuts
#6 (50)
1/4" (10"
#8 (40)
#10 (30)
5/16" (10)

Wasn't able to find dimensions of the cases, but I'm guessing the width to be around 18", width around 6.5" and maybe 2.5" tall per case / 7.5" tall total when stacked? So...roughly the size of a breadbox? Total ballpark. If someone owns one and wants to measure, that would be swell.

As far as quality is concerned, these are almost certainly on the lower end. I wouldn't depend on them for any considerable amount of shear strength requirements. I also don't know that I believe the "chrome" finish claim. Looks like standard zinc to me...which I'm perfectly fine with (takes gun bluing great if I need a black hardware piece), but some people might not be. I've found that kits like this can be useful if assembling/repairing things that don't require a lot of load, nor much torque to insert (pre-drilled pilot or threaded holes, for example). I make a lot of small crafts, customize toys for my kids, etc.

Anywho, hope this is helpful. If anyone wants to return the favor and can recommend empty stackable storage bins like this, I would be most appreciative. My brother-in-law gave me a metric crap-ton of assorted nuts/bolts/washers that his mechanic shop was ready to throw out, and I've been meaning to get them organized for ages.

This!
Shit, if you need higher grade hardware, at least you could use these to figure out what size it is, and then go in and buy the higher grade stuff....

In for 1. Looks like a good assortment. These are worth their weight in gold when you find yourself scrounging the garage or basement for that 1 nut or bolt you need to fix something