Creality currently has an offer for 5 bottles of their SLA 3d printer resin for $55. So $11 per bottle or $22 per litre, compared to about $29 per litre if you buy the Creality resin on Amazon.
It works with all resin printers from other manufacturers like Elegoo, Anycubic etc. too of course, not just with the Creality ones.
There are three options available, each one contains 5x 0.5 litre bottles:
5x Gray
or 5x Transparentg
or 2x Gray + 1x Black + 1x Transparent + 1x Flesh (for miniatures/painting)
- For 405nm UV printers
- Low odor
- Rapid curing
- Density 1.14g/cm3
- Viscosity 300-400cps
- Hardness 85-90D
- Tensile strength 60-68Mpa
- Shelf Life 12 month
- Elongation 9-12%
Shipping is free.
https://www.creality3dofficial.co...er-resin-5
5 Comments
Your comment cannot be blank.
Sign up for a Slickdeals account to remove this ad.
OK. Good to know. Thank you. I use sariya tech and have had 100% good prints unless it was error on my part w settings