Did this coupon
work for you?
work for you?
Product Name: | Cooler Master MWE Gold 850 V2 Full Modular, 850W, 80+ Gold Efficiency, 2 EPS Connectors, 120mm HDB Fan, Semi-fanless Operation, 5 Year Warranty |
Manufacturer: | Cooler Master |
Model Number: | MPE-8501-AFAAG-US |
Product SKU: | B08M9M6DB9 |
The link has been copied to the clipboard.
43 Comments
Your comment cannot be blank.
Sign up for a Slickdeals account to remove this ad.
It seems it is tier 2 as per https://linustechtips.c
It seems it is tier 2 as per https://linustechtips.com/topic/1...-rev-161a/ [linustechtips.com]
EDIT: thats just a post on linus' forum from a member.
If you want to check on psu's, just google the unti and cultist. The bronze, gold, platinum, etc ratings are absolutely useless.
Our community has rated this post as helpful. If you agree, why not thank geek37
i7 11700k
z590 board
32gb ram
rtx3060ti
samsung 990pro
10 120mm rgb fans
EDIT: thats just a post on linus' forum from a member.
If you want to check on psu's, just google the unti and cultist. The bronze, gold, platinum, etc ratings are absolutely useless.
B tier assuming it should be okay then? Would be using it on a 7700x and adding a 7900XT GPU later on.
Yes, B tier is very good. The general rule is buy c tier and above. It's not a watered down "afraid to give a bad grade" system. C tier is actually average and perfectly safe to use. A tier is truly top of the line. So any b tier units are good.
edit: as for your system requirements, 850w should be more than plenty. I can't imagine what you could be running that would push this. if you have concerns, add up the watts, or you could get a rough estimate by throwing your system specs into pcpartpicker. it'll give you a pretty close estimate to your wattage. just make sure you add in a buffer (if your system needs 438 watts, don't buy a 450 w unit. you'll want something closer to 550 o even 600 to account for spikes, future upgrades,etc). pretty easy peasy stuff with all of the resources out there.
honestly, most people buy too large of a unit because they think it's better. you don't need to overspend and should try to appropriately size your psu for best efficiency.
Sign up for a Slickdeals account to remove this ad.
edit: as for your system requirements, 850w should be more than plenty. I can't imagine what you could be running that would push this. if you have concerns, add up the watts, or you could get a rough estimate by throwing your system specs into pcpartpicker. it'll give you a pretty close estimate to your wattage. just make sure you add in a buffer (if your system needs 438 watts, don't buy a 450 w unit. you'll want something closer to 550 o even 600 to account for spikes, future upgrades,etc). pretty easy peasy stuff with all of the resources out there.
honestly, most people buy too large of a unit because they think it's better. you don't need to overspend and should try to appropriately size your psu for best efficiency.
edit: as for your system requirements, 850w should be more than plenty. I can't imagine what you could be running that would push this. if you have concerns, add up the watts, or you could get a rough estimate by throwing your system specs into pcpartpicker. it'll give you a pretty close estimate to your wattage. just make sure you add in a buffer (if your system needs 438 watts, don't buy a 450 w unit. you'll want something closer to 550 o even 600 to account for spikes, future upgrades,etc). pretty easy peasy stuff with all of the resources out there.
honestly, most people buy too large of a unit because they think it's better. you don't need to overspend and should try to appropriately size your psu for best efficiency.
I used to think these 700+ watts psu's were overkill until I watched a video and read about gpu transient spikes. It was especially bad with the Radeon rx 6xxx series. You may want to read up on them.
PS. if anyone wants a quick and dirty run-down of this issue, GN has an excellent explanation. I believe it might be slightly older, but still valid.
PS. if anyone wants a quick and dirty run-down of this issue, GN has an excellent explanation. I believe it might be slightly older, but still valid.
You need like a 750+ watt psu to run a 6800 xt even though in typical scenarios you can probably get away with 650 or even 550 watts. It's those millisecond spikes that cause crashes.
EDIT: thats just a post on linus' forum from a member.
If you want to check on psu's, just google the unti and cultist. The bronze, gold, platinum, etc ratings are absolutely useless.