This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
Model: Integra DRX 3.4 100W 9.2-Channel 8K Network AV Receiver
Deal HistoryÂ
Deal History includes data from multiple reputable stores, such as Best Buy, Target, and Walmart. The lowest price among stores for a given day is selected as the "Sale Price".
Sale Price does not include sale prices at Amazon unless a deal was posted by a community member.
You are experiencing the infamous SW bug that was plaguing all the 2021 PAC AVRs until recently. The only difference is that those AVRs that were getting DLBM/DLBC via recent firmware had the bug fixed (i.e. RZ50 and DRX 5.4). There's a workaround here: https://www.avsforum.com/posts/61244181/
Hopefully, that post gets you closer to what you expect! It's not a clean fix like the next tier up AVRs but at least it has been seen and addressed by others!
I bought this when the last deal was posted. I'm new to Dirac Live and it's been a confusing experience coming from Audyssey. The mobile app is buggy and constantly disconnects. I only had success using it with a laptop. I did numerous measurements on numerous volumes and still can't get any bass coming from my sub. Dialogue is hard to hear. I have to raise the center channel +10 to hear anything. Dirac always sets it at -2. There doesn't seem to be a dynamic volume option like I had on my Denon S750H which is kind of a bummer. That came in handy for listening at low volumes. The night mode on the Integra doesn't seem to do anything. Minor gripe, the front display only shows what input it's on, not what sound format is being played. Maybe I need to tinker with it more but I've been underwhelmed by it so far.
In my opinion the laptop is the way it should be done
Sounds like you didnt set your speaker configuration BEFORE you ran Dirac
On some brands this will give you an immediate error message though I dont know if that is the way the Integra/Onkyo units perform and if it will let you go forward
I knew this part from the Arcam set up and just did it out of habit when I set up my RZ50
Dirac is not as initiative as the Asian room correction systems
But after you do it once its not that bad and the good news, IMO, is that it doesnt need to be tweaked constantly like I personally had to do with Audyssey
Fortunately, I bought my first Dirac equipped unit from an independent dealer who stepped me through the process
As for this display you mention you have to buy higher up in the model line for that feature.
Our community has rated this post as helpful. If you agree, why not thank GrandpaBorgnine
I bought this when the last deal was posted. I'm new to Dirac Live and it's been a confusing experience coming from Audyssey. The mobile app is buggy and constantly disconnects. I only had success using it with a laptop. I did numerous measurements on numerous volumes and still can't get any bass coming from my sub. Dialogue is hard to hear. I have to raise the center channel +10 to hear anything. Dirac always sets it at -2. There doesn't seem to be a dynamic volume option like I had on my Denon S750H which is kind of a bummer. That came in handy for listening at low volumes. The night mode on the Integra doesn't seem to do anything. Minor gripe, the front display only shows what input it's on, not what sound format is being played. Maybe I need to tinker with it more but I've been underwhelmed by it so far.
Our community has rated this post as helpful. If you agree, why not thank turnne
Quote
from GrandpaBorgnine
:
I bought this when the last deal was posted. I'm new to Dirac Live and it's been a confusing experience coming from Audyssey. The mobile app is buggy and constantly disconnects. I only had success using it with a laptop. I did numerous measurements on numerous volumes and still can't get any bass coming from my sub. Dialogue is hard to hear. I have to raise the center channel +10 to hear anything. Dirac always sets it at -2. There doesn't seem to be a dynamic volume option like I had on my Denon S750H which is kind of a bummer. That came in handy for listening at low volumes. The night mode on the Integra doesn't seem to do anything. Minor gripe, the front display only shows what input it's on, not what sound format is being played. Maybe I need to tinker with it more but I've been underwhelmed by it so far.
In my opinion the laptop is the way it should be done
Sounds like you didnt set your speaker configuration BEFORE you ran Dirac
On some brands this will give you an immediate error message though I dont know if that is the way the Integra/Onkyo units perform and if it will let you go forward
I knew this part from the Arcam set up and just did it out of habit when I set up my RZ50
Dirac is not as initiative as the Asian room correction systems
But after you do it once its not that bad and the good news, IMO, is that it doesnt need to be tweaked constantly like I personally had to do with Audyssey
Fortunately, I bought my first Dirac equipped unit from an independent dealer who stepped me through the process
As for this display you mention you have to buy higher up in the model line for that feature.
Our community has rated this post as helpful. If you agree, why not thank shaddai
Quote
from GrandpaBorgnine
:
I bought this when the last deal was posted. I'm new to Dirac Live and it's been a confusing experience coming from Audyssey. The mobile app is buggy and constantly disconnects. I only had success using it with a laptop. I did numerous measurements on numerous volumes and still can't get any bass coming from my sub. Dialogue is hard to hear. I have to raise the center channel +10 to hear anything. Dirac always sets it at -2. There doesn't seem to be a dynamic volume option like I had on my Denon S750H which is kind of a bummer. That came in handy for listening at low volumes. The night mode on the Integra doesn't seem to do anything. Minor gripe, the front display only shows what input it's on, not what sound format is being played. Maybe I need to tinker with it more but I've been underwhelmed by it so far.
You are experiencing the infamous SW bug that was plaguing all the 2021 PAC AVRs until recently. The only difference is that those AVRs that were getting DLBM/DLBC via recent firmware had the bug fixed (i.e. RZ50 and DRX 5.4). There's a workaround here: https://www.avsforum.com/posts/61244181/
Hopefully, that post gets you closer to what you expect! It's not a clean fix like the next tier up AVRs but at least it has been seen and addressed by others!
Currently fighting with my Onkyo TX-NR6050 because it greatly struggles to do 2 zones at the same time. Constantly signal dropping making it unusable. I don't know why it's so tough to get a receiver that can direct 2 4k signals at the same time. Hell, even setting everything to 1080P doesn't help. I feel like this receiver would do what I need, but I spent $300 on this just 2 years ago. It seems silly to spend double that just to fix something my receiver is already supposed to do. But also the features of this one sound really nice.
Currently fighting with my Onkyo TX-NR6050 because it greatly struggles to do 2 zones at the same time. Constantly signal dropping making it unusable. I don't know why it's so tough to get a receiver that can direct 2 4k signals at the same time. Hell, even setting everything to 1080P doesn't help. I feel like this receiver would do what I need, but I spent $300 on this just 2 years ago. It seems silly to spend double that just to fix something my receiver is already supposed to do. But also the features of this one sound really nice.
It's all HDCP bs. I've tried several receivers and devices to split a signal between my projector and my bedroom tv and I still get signal drops.
Has anyone here had the chance to try out both this Integra and the Onkyo TX- RZ50?
I have the Integra sitting in my family room unopened. I'm really on the fence between these two AVRs. I got it locally for this incredible price on a price match so easy to return. For me it's kind of a PITA to hook up and unhook so I like to guess right on the first try.
Other than the extra 2 year's warranty on the Integra (5 years vs 3 years) there are some things I like better on the Onkyo but I'm not sure if it warrants the $220 price difference ($799 for the RZ50):
THX loudness plus which might be really beneficial while listening late at night.
Bit of extra power / headroom of 20 wpc.
11.2 channel processing with an external amp.
Larger chasis for better airflow ( I have an AC Infinity fan anyhow, which helped with my now sold Denon AVRX4500H, which ran very hot).
Overall look and feel of the Onkyo.
OTOH, Integra perhaps uses better internal components as it's Onkyo's flagship brand but who knows??
Anyone care to chime in?
Last edited by cpatrader January 27, 2025 at 10:08 AM.
Has anyone here had the chance to try out both this Integra and the Onkyo TX- RZ50?
I have the Integra sitting in my family room unopened. I'm really on the fence between these two AVRs. I got it locally for this incredible price on a price match so easy to return. For me it's kind of a PITA to hook up and unhook so I like to guess right on the first try.
Other than the extra 2 year's warranty on the Integra (5 years vs 3 years) there are some things I like better on the Onkyo but I'm not sure if it warrants the $220 price difference ($799 for the RZ50):
THX loudness plus which might be really beneficial while listening late at night.
Bit of extra power / headroom of 20 wpc.
11.2 channel processing with an external amp.
Larger chasis for better airflow ( I have an AC Infinity fan anyhow, which helped with my now sold Denon AVRX4500H, which ran very hot).
Overall look and feel of the Onkyo.
OTOH, Integra perhaps uses better internal components as it's Onkyo's flagship brand but who knows??
Anyone care to chime in?
Both the RZ50 and DRX 3.4 are very similar and many folks quite often call the DRX 3.4 a clone of the RZ50 (this is wrong as the DRX 5.4 is the RZ50 clone and the DRX 3.4 is a clone of the 7100 despite having pre-outs).
I personally would get the RZ50 but everyone's needs are different so you have to ask yourself:
- how likely will you get external amps for 11 channels?
- do I want to be able to purchase and run Dirac Live Bass Control (DLBC) down the road? This is not an option on the DRX 3.4.
Note that if you have low impedance speakers and/or want full Dirac capability, the only PAC AVRs I would recommend would be the Onkyo RZ70, Pioneer 805, or Integra DRX 8.4 (and not the DRX 3.4 or RZ50)!
Our community has rated this post as helpful. If you agree, why not thank turnne
Quote
from cpatrader
:
Has anyone here had the chance to try out both this Integra and the Onkyo TX- RZ50?
I have the Integra sitting in my family room unopened. I'm really on the fence between these two AVRs. I got it locally for this incredible price on a price match so easy to return. For me it's kind of a PITA to hook up and unhook so I like to guess right on the first try.
Other than the extra 2 year's warranty on the Integra (5 years vs 3 years) there are some things I like better on the Onkyo but I'm not sure if it warrants the $220 price difference ($799 for the RZ50):
THX loudness plus which might be really beneficial while listening late at night.
Bit of extra power / headroom of 20 wpc.
11.2 channel processing with an external amp.
Larger chasis for better airflow ( I have an AC Infinity fan anyhow, which helped with my now sold Denon AVRX4500H, which ran very hot).
Overall look and feel of the Onkyo.
OTOH, Integra perhaps uses better internal components as it's Onkyo's flagship brand but who knows??
Anyone care to chime in?
I own the RZ50 and based on what I know about the Integra I would not pay the difference...unless you really think you will expand to 11.2 and will eventually go with an external amp
I paid $550 for the RZ50 at a Best Buy outlet store about a year ago as a whim purchase
I am using it for a 5.1 system running bookshelves and a single sub in a smaller/midsize room
For the price..the performance is phenomenal
I really doubt there is much if any difference in the internal components of the Onkyo and Integra units...similar to the Denon versus Marantz units
The 5 year warranty is nice though
THX loudness plus cannot be used with Dirac engaged
Thanks so much for the replies. I totally agree with both.
For me the Onkyo is a bit more future proof than the Integra although I'm unlikely to run an 11.2 system in the future. I currently have a 5.1.2 set up with easy to drive bookshelf speakers.
I'd probably never add on bass control, etc. Just sticking with a single sub for the foreseeable future.
Speaking from experience,and sound quality wise, I know the best thing would be to buy the Integra and add a good quality 5 channel external amplifier with the $220 saved. I used to have a 5 channel Rotel amp and that thing was an absolute beast. I rarely listen very loud anymore however and something of that nature ( like an Emotiva) would be way overkill.
I'd like to stay married if possible lol.
Maybe that larger power supply on the RZ 50 is enough to circumvent having to add an external amp later on ( other than a 2 channel to power it as an 11.2 system).
The extra 2 year Integra warranty is very nice to have however given the problems with HDMI boards, etc.
Thanks so much for the replies. I totally agree with both.
For me the Onkyo is a bit more future proof than the Integra although I'm unlikely to run an 11.2 system in the future. I currently have a 5.1.2 set up with easy to drive bookshelf speakers.
I'd probably never add on bass control, etc. Just sticking with a single sub for the foreseeable future.
Speaking from experience,and sound quality wise, I know the best thing would be to buy the Integra and add a good quality 5 channel external amplifier with the $220 saved. I used to have a 5 channel Rotel amp and that thing was an absolute beast. I rarely listen very loud anymore however and something of that nature ( like an Emotiva) would be way overkill.
I'd like to stay married if possible lol.
Maybe that larger power supply on the RZ 50 is enough to circumvent having to add an external amp later on ( other than a 2 channel to power it as an 11.2 system).
The extra 2 year Integra warranty is very nice to have however given the problems with HDMI boards, etc.
Decisions, decisions..
I have experience with both but not side by side.
Both implemented properly, you likely wouldn't hear much difference.
I like the external amp route(IF you even need it). Paying for larger power supply every time you upgrade is counterproductive imo.
External amps are almost always way better than internal ones also, you only pay once.
Keep in mind neither offers Dirac's subwoofer correction/integration, that is all within their DLBC RC.
Most people believe it's no benefit so not sure how much value it is anyways.
Whichever you choose I would highly recommend following this calibration process, it's probably one of the best imo.
They worked directly with Dirac and do a great job covering common confusions,misinformation & tips and tricks.
I'm not who you are replying to, but one thing to note is that the RZ50 only outputs the same signal to both LFE outs (they're not independently EQable). That really limits what DLBC can do for multi-sub setups.
4
Like
Helpful
Funny
Not helpful
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
Top Comments
https://www.avsforum.co
Hopefully, that post gets you closer to what you expect! It's not a clean fix like the next tier up AVRs but at least it has been seen and addressed by others!
Sounds like you didnt set your speaker configuration BEFORE you ran Dirac
On some brands this will give you an immediate error message though I dont know if that is the way the Integra/Onkyo units perform and if it will let you go forward
I knew this part from the Arcam set up and just did it out of habit when I set up my RZ50
Dirac is not as initiative as the Asian room correction systems
But after you do it once its not that bad and the good news, IMO, is that it doesnt need to be tweaked constantly like I personally had to do with Audyssey
Fortunately, I bought my first Dirac equipped unit from an independent dealer who stepped me through the process
As for this display you mention you have to buy higher up in the model line for that feature.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
64 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank GrandpaBorgnine
Our community has rated this post as helpful. If you agree, why not thank turnne
Sounds like you didnt set your speaker configuration BEFORE you ran Dirac
On some brands this will give you an immediate error message though I dont know if that is the way the Integra/Onkyo units perform and if it will let you go forward
I knew this part from the Arcam set up and just did it out of habit when I set up my RZ50
Dirac is not as initiative as the Asian room correction systems
But after you do it once its not that bad and the good news, IMO, is that it doesnt need to be tweaked constantly like I personally had to do with Audyssey
Fortunately, I bought my first Dirac equipped unit from an independent dealer who stepped me through the process
As for this display you mention you have to buy higher up in the model line for that feature.
Our community has rated this post as helpful. If you agree, why not thank shaddai
https://www.avsforum.co
Hopefully, that post gets you closer to what you expect! It's not a clean fix like the next tier up AVRs but at least it has been seen and addressed by others!
Sign up for a Slickdeals account to remove this ad.
I have the Integra sitting in my family room unopened. I'm really on the fence between these two AVRs. I got it locally for this incredible price on a price match so easy to return. For me it's kind of a PITA to hook up and unhook so I like to guess right on the first try.
Other than the extra 2 year's warranty on the Integra (5 years vs 3 years) there are some things I like better on the Onkyo but I'm not sure if it warrants the $220 price difference ($799 for the RZ50):
THX loudness plus which might be really beneficial while listening late at night.
Bit of extra power / headroom of 20 wpc.
11.2 channel processing with an external amp.
Larger chasis for better airflow ( I have an AC Infinity fan anyhow, which helped with my now sold Denon AVRX4500H, which ran very hot).
Overall look and feel of the Onkyo.
OTOH, Integra perhaps uses better internal components as it's Onkyo's flagship brand but who knows??
Anyone care to chime in?
I have the Integra sitting in my family room unopened. I'm really on the fence between these two AVRs. I got it locally for this incredible price on a price match so easy to return. For me it's kind of a PITA to hook up and unhook so I like to guess right on the first try.
Other than the extra 2 year's warranty on the Integra (5 years vs 3 years) there are some things I like better on the Onkyo but I'm not sure if it warrants the $220 price difference ($799 for the RZ50):
THX loudness plus which might be really beneficial while listening late at night.
Bit of extra power / headroom of 20 wpc.
11.2 channel processing with an external amp.
Larger chasis for better airflow ( I have an AC Infinity fan anyhow, which helped with my now sold Denon AVRX4500H, which ran very hot).
Overall look and feel of the Onkyo.
OTOH, Integra perhaps uses better internal components as it's Onkyo's flagship brand but who knows??
Anyone care to chime in?
I personally would get the RZ50 but everyone's needs are different so you have to ask yourself:
- how likely will you get external amps for 11 channels?
- do I want to be able to purchase and run Dirac Live Bass Control (DLBC) down the road? This is not an option on the DRX 3.4.
Note that if you have low impedance speakers and/or want full Dirac capability, the only PAC AVRs I would recommend would be the Onkyo RZ70, Pioneer 805, or Integra DRX 8.4 (and not the DRX 3.4 or RZ50)!
Our community has rated this post as helpful. If you agree, why not thank turnne
I have the Integra sitting in my family room unopened. I'm really on the fence between these two AVRs. I got it locally for this incredible price on a price match so easy to return. For me it's kind of a PITA to hook up and unhook so I like to guess right on the first try.
Other than the extra 2 year's warranty on the Integra (5 years vs 3 years) there are some things I like better on the Onkyo but I'm not sure if it warrants the $220 price difference ($799 for the RZ50):
THX loudness plus which might be really beneficial while listening late at night.
Bit of extra power / headroom of 20 wpc.
11.2 channel processing with an external amp.
Larger chasis for better airflow ( I have an AC Infinity fan anyhow, which helped with my now sold Denon AVRX4500H, which ran very hot).
Overall look and feel of the Onkyo.
OTOH, Integra perhaps uses better internal components as it's Onkyo's flagship brand but who knows??
Anyone care to chime in?
I paid $550 for the RZ50 at a Best Buy outlet store about a year ago as a whim purchase
I am using it for a 5.1 system running bookshelves and a single sub in a smaller/midsize room
For the price..the performance is phenomenal
I really doubt there is much if any difference in the internal components of the Onkyo and Integra units...similar to the Denon versus Marantz units
The 5 year warranty is nice though
THX loudness plus cannot be used with Dirac engaged
For me the Onkyo is a bit more future proof than the Integra although I'm unlikely to run an 11.2 system in the future. I currently have a 5.1.2 set up with easy to drive bookshelf speakers.
I'd probably never add on bass control, etc. Just sticking with a single sub for the foreseeable future.
Speaking from experience,and sound quality wise, I know the best thing would be to buy the Integra and add a good quality 5 channel external amplifier with the $220 saved. I used to have a 5 channel Rotel amp and that thing was an absolute beast. I rarely listen very loud anymore however and something of that nature ( like an Emotiva) would be way overkill.
I'd like to stay married if possible lol.
Maybe that larger power supply on the RZ 50 is enough to circumvent having to add an external amp later on ( other than a 2 channel to power it as an 11.2 system).
The extra 2 year Integra warranty is very nice to have however given the problems with HDMI boards, etc.
Decisions, decisions..
For me the Onkyo is a bit more future proof than the Integra although I'm unlikely to run an 11.2 system in the future. I currently have a 5.1.2 set up with easy to drive bookshelf speakers.
I'd probably never add on bass control, etc. Just sticking with a single sub for the foreseeable future.
Speaking from experience,and sound quality wise, I know the best thing would be to buy the Integra and add a good quality 5 channel external amplifier with the $220 saved. I used to have a 5 channel Rotel amp and that thing was an absolute beast. I rarely listen very loud anymore however and something of that nature ( like an Emotiva) would be way overkill.
I'd like to stay married if possible lol.
Maybe that larger power supply on the RZ 50 is enough to circumvent having to add an external amp later on ( other than a 2 channel to power it as an 11.2 system).
The extra 2 year Integra warranty is very nice to have however given the problems with HDMI boards, etc.
Decisions, decisions..
Both implemented properly, you likely wouldn't hear much difference.
I like the external amp route(IF you even need it). Paying for larger power supply every time you upgrade is counterproductive imo.
External amps are almost always way better than internal ones also, you only pay once.
Keep in mind neither offers Dirac's subwoofer correction/integration, that is all within their DLBC RC.
Most people believe it's no benefit so not sure how much value it is anyways.
Whichever you choose I would highly recommend following this calibration process, it's probably one of the best imo.
They worked directly with Dirac and do a great job covering common confusions,misinformation & tips and tricks.
https://www.youtube.com/watch?v=gjWZUZ1
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!