Our research indicates that this deal is $350.99 less (32% savings) than the next best available price from a reputable merchant with prices starting at $1099.99 at the time of this posting.
About this Product:
Onkyo 2 Year Limited Warranty
Additional Notes:
Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
Our research indicates that this deal is $350.99 less (32% savings) than the next best available price from a reputable merchant with prices starting at $1099.99 at the time of this posting.
About this Product:
Onkyo 2 Year Limited Warranty
Additional Notes:
Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
Deal History includes data from multiple reputable stores, such as Best Buy, Target, and Walmart. The lowest price among stores for a given day is selected as the "Sale Price".
Sale Price does not include sale prices at Amazon unless a deal was posted by a community member.
The Onkyo TX-RZ30 is a modern 9.2-channel receiver that stands out for Dirac Live Bass Control support, two independent subwoofer outputs, newer HDMI 2.1a features, and pre-outs for external amplification. It is also seen as a strong value at $749, especially for buyers who want Dirac without moving up to a higher model. The main caveat is power, since the 170W figure is for one channel driven and real-world output is closer to about 100W with all channels driven. Dirac's included room correction also does not handle subwoofer integration on its own, so some setups may still want extra calibration hardware.
Home theater owners adding a second subwoofer, because the receiver has independent dual sub outputs and supports Dirac Live Bass Control.
Upgraders from older receivers who want a newer platform, because it adds current HDMI features, Dirac, and dual sub outputs over older Onkyo and Integra models.
Owners planning to add external amplification later, because the pre-outs let you offload power to an external amp instead of relying on the internal channels.
Owners of routinely 2-ohm speakers, because receivers in this class are generally rated for 4-ohm loads and low-impedance dips may call for external amplification.
People expecting the advertised wattage to reflect real-world multichannel output, because the 170W figure is only for one channel driven and drops closer to 100W with all channels driven.
Subwoofer tuners who want built-in bass integration from the included Dirac package, because the included Dirac does not provide subwoofer correction or integration.
For many shoppers, yes: the RZ30 is newer, has DLBC access, dual independent sub outs, and newer HDMI 2.1a features, while the Integra's 5-year warranty may not offset shipping hassles. The DRX 3.4 can still make sense if warranty coverage is the top priority or if you want to save money.
Yes. The RZ30 adds Dirac Live Bass Control support and has two independent subwoofer outputs, which is a key reason to choose it for room correction and dual-sub setups. The included Dirac package does not add subwoofer correction/integration by itself, so bass management still matters.
The 170W figure is for 1 channel driven at 6 ohms, not a full-system rating. Under the more typical 8-ohm, 2-channel-driven condition, it is around 100W per channel, and that is the comparison that matters for real-world use.
It is officially in the same class as most receivers here, which are rated down to 4 ohms. If your speakers routinely dip to 2 ohms, external amplification is the safer choice.
Yes. It has pre-outs, so you can add external amplification later for the front channels or other speakers if you want more headroom. That makes it easier to upgrade power without replacing the receiver.
Alright. For $749, this is a better buy than the DRX 3.4 at $569. The extra $190 is worth the spend here. For the additional processed channels and the independent sub out with DLBC. It was tough to recommend over the Integra at $899, but for $749, it's an instant buy.
Edit: no additional processed channels. I was thinking of the RZ50. Still though, Great buy at $750
Last edited by ShieldsPC August 17, 2025 at 07:07 PM.
For $749, with Dirac (worth $300 alone), this is an instant buy. Glad it has two independent subwoofer channels, just picked up a RSL 10S MK II and would be nice to have the option to add a second down the road.
Alright. For $749, this is a better buy than the DRX 3.4 at $569. The extra $190 is worth the spend here. For the additional processed channels and the independent sub out with DLBC. It was tough to recommend over the Integra at $899, but for $749, it's an instant buy.
I think it's worth the upgrade as well, but just to be clear the RZ30 doesn't support any additional processed channels over the DRX 3.4. They both are limited to 9 channels (7.x.2 or 5.x.4 max).
For $749, with Dirac (worth $300 alone), this is an instant buy. Glad it has two independent subwoofer channels, just picked up a RSL 10S MK II and would be nice to have the option to add a second down the road.
If Dirac is a high priority, agree this at this price is the new to go unit. It's a very capable unit, less likely to needing external amps compared to the Integra unit in my experience.
Major dilemma, buy now or wait till Black Friday deals.
Usually prices drop in time so usually waiting is good idea unless you needed it right now.Unfortunately with all the turmoil going on(likely the next 4 years) prices are very likely to go up. This is a good price for what you get imo.
less likely to needing external amps compared to the Integra unit in my experience.
How so? Both AVRs are 100wpc class AB units. What makes the RZ30's power stage different from the Integra's? The only difference I can see is a THX cert on the Onkyo versus an IMAX cert on the Integra.
Last edited by ShieldsPC August 17, 2025 at 07:23 PM.
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
How so? Both AVRs are 100wpc class AB units. What makes the RZ30's power stage different from the Integra's? The only difference I can see is a THX cert on the Onkyo versus an IMAX cert on the Integra.
My impression from two separate setups I'm pretty familiar with. Overall I don't feel the Integra offers as much solid power as this. You're more likely to feel you need more power with the Integra than this. That, independent sub outs, access to DLBC & much newer as well is worth the extra $180 or so over the Integra in my experience.Just my opinion from having setup and listened to both.
How so? Both AVRs are 100wpc class AB units. What makes the RZ30's power stage different from the Integra's? The only difference I can see is a THX cert on the Onkyo versus an IMAX cert on the Integra.
Perhaps a side effect of the DRX 3.4's "limp mode" on low impedance loads vs the removal of this stealth protection circuit on the newer RZ30? The RZ30 hasn't been tested by ASR so this is pure speculation.
Perhaps a side effect of the DRX 3.4's "limp mode" on low impedance loads vs the removal of this stealth protection circuit on the newer RZ30? The RZ30 hasn't been tested by ASR so this is pure speculation.
This seems like a safety feature, no? I'd prefer my amp shut down at 90% power than risk pushing too hard and burning itself out. Maybe that's why Integra's warranty is so much better. in any case, I don't get past 75/100 on the volume knob on my DRX 3.4. Couldn't imagine needing more power than that.
This seems like a safety feature, no? I'd prefer my amp shut down at 90% power than risk pushing too hard and burning itself out. Maybe that's why Integra's warranty is so much better. in any case, I don't get past 75/100 on the volume knob on my DRX 3.4. Couldn't imagine needing more power than that.
"Protect mode" = machine shuts down to prevent further damage. Obvious to owner.
"ECO mode" = power output is limited and ramped up to meet dynamic requirements. Owner-selected.
"Limp mode" = power output is limited (on low impedance speakers) without the owner's knowledge. This manifests itself as less detail, distortion, or any number of other things. A typical Denon, Sony, or Yamaha that doesn't have "limp mode" would never cut off power so severely.
This seems like a safety feature, no? I'd prefer my amp shut down at 90% power than risk pushing too hard and burning itself out. Maybe that's why Integra's warranty is so much better. in any case, I don't get past 75/100 on the volume knob on my DRX 3.4. Couldn't imagine needing more power than that.
Yes it's just a measurement "problem" not an audible one. It's been 4 years and it's been a silly non issue.No one has ever said they heard the issue. Not to mention it's only an issue with 6&4 ohm speakers, it not an issue with 8ohm speakers.
Like
Helpful
Funny
Not helpful
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
Top Comments
Community Reviews
The Onkyo TX-RZ30 is a modern 9.2-channel receiver that stands out for Dirac Live Bass Control support, two independent subwoofer outputs, newer HDMI 2.1a features, and pre-outs for external amplification. It is also seen as a strong value at $749, especially for buyers who want Dirac without moving up to a higher model. The main caveat is power, since the 170W figure is for one channel driven and real-world output is closer to about 100W with all channels driven. Dirac's included room correction also does not handle subwoofer integration on its own, so some setups may still want extra calibration hardware.
The RZ30 adds Dirac Live Bass Control and independent dual sub outputs for more flexible bass management.
The RZ30 includes pre-outs that let you add external amplification later without relying solely on internal power.
The RZ30 supports newer HDMI 2.1a features like eARC and QMS for modern TV and projector setups.
The RZ30 can be a strong budget path to Dirac Live Bass Control access when Dirac is the priority.
The advertised 170W power figure can be misleading because it applies to a single channel driven condition.
The included Dirac RC on the RZ30 reportedly does not provide subwoofer correction or integration, so bass setup may still require extra work.
The RZ30 and Integra DRX 3.4 are limited to the same overall channel processing range, so the upgrade may not add extra processed channels.
The RZ30 may still require external amplification if speakers routinely dip to 2 ohms during listening.
Common Questions (5)
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
57 Comments
Sign up for a Slickdeals account to remove this ad.
Edit: no additional processed channels. I was thinking of the RZ50. Still though, Great buy at $750
Sign up for a Slickdeals account to remove this ad.
"ECO mode" = power output is limited and ramped up to meet dynamic requirements. Owner-selected.
"Limp mode" = power output is limited (on low impedance speakers) without the owner's knowledge. This manifests itself as less detail, distortion, or any number of other things. A typical Denon, Sony, or Yamaha that doesn't have "limp mode" would never cut off power so severely.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!