Our research indicates that this deal is $350.99 less (32% savings) than the next best available price from a reputable merchant with prices starting at $1099.99 at the time of this posting.
About this Product:
Onkyo 2 Year Limited Warranty
Additional Notes:
Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
Our research indicates that this deal is $350.99 less (32% savings) than the next best available price from a reputable merchant with prices starting at $1099.99 at the time of this posting.
About this Product:
Onkyo 2 Year Limited Warranty
Additional Notes:
Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
Deal History includes data from multiple reputable stores, such as Best Buy, Target, and Walmart. The lowest price among stores for a given day is selected as the "Sale Price".
Sale Price does not include sale prices at Amazon unless a deal was posted by a community member.
The Onkyo TX-RZ30 is a modern 9.2-channel receiver that stands out for Dirac Live Bass Control support, two independent subwoofer outputs, newer HDMI 2.1a features, and pre-outs for external amplification. It is also seen as a strong value at $749, especially for buyers who want Dirac without moving up to a higher model. The main caveat is power, since the 170W figure is for one channel driven and real-world output is closer to about 100W with all channels driven. Dirac's included room correction also does not handle subwoofer integration on its own, so some setups may still want extra calibration hardware.
Home theater owners adding a second subwoofer, because the receiver has independent dual sub outputs and supports Dirac Live Bass Control.
Upgraders from older receivers who want a newer platform, because it adds current HDMI features, Dirac, and dual sub outputs over older Onkyo and Integra models.
Owners planning to add external amplification later, because the pre-outs let you offload power to an external amp instead of relying on the internal channels.
Owners of routinely 2-ohm speakers, because receivers in this class are generally rated for 4-ohm loads and low-impedance dips may call for external amplification.
People expecting the advertised wattage to reflect real-world multichannel output, because the 170W figure is only for one channel driven and drops closer to 100W with all channels driven.
Subwoofer tuners who want built-in bass integration from the included Dirac package, because the included Dirac does not provide subwoofer correction or integration.
For many shoppers, yes: the RZ30 is newer, has DLBC access, dual independent sub outs, and newer HDMI 2.1a features, while the Integra's 5-year warranty may not offset shipping hassles. The DRX 3.4 can still make sense if warranty coverage is the top priority or if you want to save money.
Yes. The RZ30 adds Dirac Live Bass Control support and has two independent subwoofer outputs, which is a key reason to choose it for room correction and dual-sub setups. The included Dirac package does not add subwoofer correction/integration by itself, so bass management still matters.
The 170W figure is for 1 channel driven at 6 ohms, not a full-system rating. Under the more typical 8-ohm, 2-channel-driven condition, it is around 100W per channel, and that is the comparison that matters for real-world use.
It is officially in the same class as most receivers here, which are rated down to 4 ohms. If your speakers routinely dip to 2 ohms, external amplification is the safer choice.
Yes. It has pre-outs, so you can add external amplification later for the front channels or other speakers if you want more headroom. That makes it easier to upgrade power without replacing the receiver.
To the experts here, how does this compare to Integra DRX 3.4? I am looking for a boomy amp for the home theater and 170w/channel is looking attractive compared to the 100w on Integra. There is also 2 year vs 5 year warranty which is important. Thanks in advance.
Hardware-wise, the RZ30 is just about 95% identical to the 2021 clones (that includes the DRX 3.4) based on pics of internals. Don't be fooled by the "advertised wattage" as the amp in the RZ30 and the DRX 3.4 are very comparable and should only be compared under 8 ohms, 2CH driven, 20Hz-20kHz per FTC guidelines. Having said that, I would still choose the newer RZ30 over the DRX 3.4 for the following reasons:
1) The 5 year warranty on the Integra is over-rated. SD members who own the DRX 3.4 have commented that shipping is on you for any repair work. How often will you be shipping it back and forth in that 5 year period? The HDMI board appears to be not a matter of "if it will fail" but "when".
2) The HDMI board on the RZ30 is newer and I believe it also has heatsinks (see comment #1 for why this would be important).
3) DLBC works on the RZ30 but doesn't on the 2021 clones (7100, DRX 3.4, Pioneer 305) despite nearly identical hardware (especially the DSP which determines capability). This was a segmentation move by PAC. I think being DLBC-capable makes the RZ30 far more attractive, whether you can make use of it today or not!
If it was my money, I'd get the RZ30 over the DRX 3.4. I can understand if the $200 difference can be a burden for some folks so do w/the above info as you will!
Last edited by shaddai August 9, 2025 at 07:30 AM.
I've been considering this RZ30 vs Integra 3.4 for my new basement home theater. RZ30 seems better and this is best price (it has been 750 or 800 many times though). But the basement won't be finished for about 6 months which means, no return policy, and 1/4 of the warranty gone before I can use it. Go for it, wait for black friday, or just go with integra? Integra 5 year warranty is pretty convincing! Are price increases expected due to trump terrifs, are these deals going to keep coming? Big questions..
Yes this is the lowest this has been.
Tough call on waiting nowadays, prices could easily go up(have in some cases) in all this turmoil going on right now(& next 4 years).
Assuming a main reason you're considering this and the Integra is Dirac.
This is the easy choice in my experience.
It's much newer, access to DLBC, 2 independent sub outs and less likely to add/need external power.
Direc is a reason but also its just a good price point. I could also spend twice as much on a Denon (I could, but don't want to spend that much). I've never owned Onkyo / Pioneer and thought I should give it a try. RZ30 is the way to go. I don't love looks of the integra, it just looks dated, but the price is right. The last time I bought a receiver was a cheap yamaha in about 2012!
i actually could use the onkyo to replace the yamaha temporarily (main floor 5.1, for tv) so I could get some use out of it right away.
edit: ordered it
Yes having experience with both and someone wanting Dirac, this is the best way to go imo.
Especially if you're being budget conscious.
It's the least expensive way to get access to DLBC, imo is the only reason to go with Dirac.
One main reason to go with anything higher would be if you needed 11 channels of processing.
Denon/Marantz has a few other features on top of that but most people either don't need them or believe they aren't much benefit for the cost.
They also have access to A1EVO which pretty much negates needing Dirac especially since you have to purchase their not included subwoofer/bass correction/integration RC.
Choose the RZ50 only if you need 11 channels of processing AND have an external amp for 2 surrounds. These Onkyos unfortunately don't allow you to isolate any of the front channels for outputting to external amps so your best bet are the final 2 surround channels.
You're not going to hear any difference b/w the RZ50 and the RZ30 as they use the same DACs and the power output difference is minimal. Besides, the 2 SW outputs on the RZ30 are discrete while they're not on the RZ50. You can still run DLBC on the RZ50 for 2 subs but it would require additional investment in miniDSP and EQ outside of Dirac.
This should drive those speakers just fine unless you're trying to fill a concert hall.
If you're worried about power don't invest in internal power.
Buy external power and you never have to worry or pay for it again.
That's the whole point of paying for pre outs after all.
You also end up having much better power compared to these higher priced AVRs with so called higher power.
It really depends how long the dips are, officially most receivers in this price range support down to 4ohm, if you are using speakers that are routinely in the two ohm range (magnepan for example) then you really are going to want to go external amplification.
what are some good options for external amplification
This should drive those speakers just fine unless you're trying to fill a concert hall.
If you're worried about power don't invest in internal power.
Buy external power and you never have to worry or pay for it again.
That's the whole point of paying for pre outs after all.
You also end up having much better power compared to these higher priced AVRs with so called higher power.
what do you think would be good for external power
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
Choose the RZ50 only if you need 11 channels of processing AND have an external amp for 2 surrounds. These Onkyos unfortunately don't allow you to isolate any of the front channels for outputting to external amps so your best bet are the final 2 surround channels.
You're not going to hear any difference b/w the RZ50 and the RZ30 as they use the same DACs and the power output difference is minimal. Besides, the 2 SW outputs on the RZ30 are discrete while they're not on the RZ50. You can still run DLBC on the RZ50 for 2 subs but it would require additional investment in miniDSP and EQ outside of Dirac.
A little clarification for people.
The RZ50 lets you power your fronts with external power.
What it won't let you do is assign those internal amps to power channels 10 & 11.
Which is what is often preferred.
Last edited by supermanrob August 9, 2025 at 10:43 PM.
1
1
Like
Helpful
Funny
Not helpful
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
Top Comments
Community Reviews
The Onkyo TX-RZ30 is a modern 9.2-channel receiver that stands out for Dirac Live Bass Control support, two independent subwoofer outputs, newer HDMI 2.1a features, and pre-outs for external amplification. It is also seen as a strong value at $749, especially for buyers who want Dirac without moving up to a higher model. The main caveat is power, since the 170W figure is for one channel driven and real-world output is closer to about 100W with all channels driven. Dirac's included room correction also does not handle subwoofer integration on its own, so some setups may still want extra calibration hardware.
The RZ30 adds Dirac Live Bass Control and independent dual sub outputs for more flexible bass management.
The RZ30 includes pre-outs that let you add external amplification later without relying solely on internal power.
The RZ30 supports newer HDMI 2.1a features like eARC and QMS for modern TV and projector setups.
The RZ30 can be a strong budget path to Dirac Live Bass Control access when Dirac is the priority.
The advertised 170W power figure can be misleading because it applies to a single channel driven condition.
The included Dirac RC on the RZ30 reportedly does not provide subwoofer correction or integration, so bass setup may still require extra work.
The RZ30 and Integra DRX 3.4 are limited to the same overall channel processing range, so the upgrade may not add extra processed channels.
The RZ30 may still require external amplification if speakers routinely dip to 2 ohms during listening.
Common Questions (5)
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
57 Comments
Sign up for a Slickdeals account to remove this ad.
1) The 5 year warranty on the Integra is over-rated. SD members who own the DRX 3.4 have commented that shipping is on you for any repair work. How often will you be shipping it back and forth in that 5 year period? The HDMI board appears to be not a matter of "if it will fail" but "when".
2) The HDMI board on the RZ30 is newer and I believe it also has heatsinks (see comment #1 for why this would be important).
3) DLBC works on the RZ30 but doesn't on the 2021 clones (7100, DRX 3.4, Pioneer 305) despite nearly identical hardware (especially the DSP which determines capability). This was a segmentation move by PAC. I think being DLBC-capable makes the RZ30 far more attractive, whether you can make use of it today or not!
If it was my money, I'd get the RZ30 over the DRX 3.4. I can understand if the $200 difference can be a burden for some folks so do w/the above info as you will!
Tough call on waiting nowadays, prices could easily go up(have in some cases) in all this turmoil going on right now(& next 4 years).
Assuming a main reason you're considering this and the Integra is Dirac.
This is the easy choice in my experience.
It's much newer, access to DLBC, 2 independent sub outs and less likely to add/need external power.
didn't this company go out of business or was bought out a couple of years ago?
i actually could use the onkyo to replace the yamaha temporarily (main floor 5.1, for tv) so I could get some use out of it right away.
edit: ordered it
Especially if you're being budget conscious.
It's the least expensive way to get access to DLBC, imo is the only reason to go with Dirac.
One main reason to go with anything higher would be if you needed 11 channels of processing.
Denon/Marantz has a few other features on top of that but most people either don't need them or believe they aren't much benefit for the cost.
They also have access to A1EVO which pretty much negates needing Dirac especially since you have to purchase their not included subwoofer/bass correction/integration RC.
Sign up for a Slickdeals account to remove this ad.
The only real advantage to the RZ50 is the extra two channels.
You're not going to hear any difference b/w the RZ50 and the RZ30 as they use the same DACs and the power output difference is minimal. Besides, the 2 SW outputs on the RZ30 are discrete while they're not on the RZ50. You can still run DLBC on the RZ50 for 2 subs but it would require additional investment in miniDSP and EQ outside of Dirac.
If you're worried about power don't invest in internal power.
Buy external power and you never have to worry or pay for it again.
That's the whole point of paying for pre outs after all.
You also end up having much better power compared to these higher priced AVRs with so called higher power.
If you're worried about power don't invest in internal power.
Buy external power and you never have to worry or pay for it again.
That's the whole point of paying for pre outs after all.
You also end up having much better power compared to these higher priced AVRs with so called higher power.
Sign up for a Slickdeals account to remove this ad.
You're not going to hear any difference b/w the RZ50 and the RZ30 as they use the same DACs and the power output difference is minimal. Besides, the 2 SW outputs on the RZ30 are discrete while they're not on the RZ50. You can still run DLBC on the RZ50 for 2 subs but it would require additional investment in miniDSP and EQ outside of Dirac.
The RZ50 lets you power your fronts with external power.
What it won't let you do is assign those internal amps to power channels 10 & 11.
Which is what is often preferred.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!