Slickdeals is community-supported.Ā  We may get paid by brands for deals, including promoted items.

Black Friday is days away. Pick your offers now.Black Friday is days away. Pick your offers now.

Start Sifting
frontpage
iconian | Staff 14.8K Views
Nov 13, 2026 9:25 PM

9.2-Ch Onkyo TX-NR7100 AV Receiver

$600

$1,400

57% off
+ Free S&Hat Adorama
Get Deal at Adorama
Good Deal?
54Comments
Save
Share
Deal Details
Adorama has 9.2-Channel Onkyo TX-NR7100 8K/4K Network A/V Receiver on sale for $749.99 - $150 when you apply promo code JHCE9926 at checkout = $599.99. Shipping is free.

Note: Apply the coupon/promo code after clicking "Do you have a gift card or promo code?" in the "Payment" section.

Thanks to Deal Editor iconian for sharing this deal.

Product Details:
  • 9.2-Channel
  • 8K/4K Network A/V Receiver
  • 220W/Channel Select Dynamic Audio Amplification (DAA)
  • 4-16 Ohms Speaker Impedance
  • 40 Station FM/AM Preset Memory
  • Dolby Atmos Height Virtualizer/DTS Virtual
  • IMAX Enhanced/DTS
  • THX Certified Reference Sound
  • Works w/ SONOS Certified Product
Includes:
  • Onkyo TX-NR7100 9.2-Channel 8K/4K Network A/V Receiver
  • Speaker Setup Microphone
  • AM Loop Antenna
  • Indoor FM Antenna
  • Power Cord
  • Remote Control
  • 2x AAA Batteries (R03)
  • 2-Year Onkyo Limited Warranty

Editor's Notes

Written by johnny_miller | Staff
  • This offer matches a +604 Frontpage Deal from last month.
  • Our research indicates that this deal is $150 less (20% savings) than the next best available price from a reputable merchant with prices starting from $749.99 at the time of this post.
  • Rated 4.7 out of 5 stars based on 30+ Adorama customer ratings.
  • Please see the original post for additional details & give the forum comments a read for helpful discussion.

Original Post

Written by iconian | Staff
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Adorama has 9.2-Channel Onkyo TX-NR7100 8K/4K Network A/V Receiver on sale for $749.99 - $150 when you apply promo code JHCE9926 at checkout = $599.99. Shipping is free.

Note: Apply the coupon/promo code after clicking "Do you have a gift card or promo code?" in the "Payment" section.

Thanks to Deal Editor iconian for sharing this deal.

Product Details:
  • 9.2-Channel
  • 8K/4K Network A/V Receiver
  • 220W/Channel Select Dynamic Audio Amplification (DAA)
  • 4-16 Ohms Speaker Impedance
  • 40 Station FM/AM Preset Memory
  • Dolby Atmos Height Virtualizer/DTS Virtual
  • IMAX Enhanced/DTS
  • THX Certified Reference Sound
  • Works w/ SONOS Certified Product
Includes:
  • Onkyo TX-NR7100 9.2-Channel 8K/4K Network A/V Receiver
  • Speaker Setup Microphone
  • AM Loop Antenna
  • Indoor FM Antenna
  • Power Cord
  • Remote Control
  • 2x AAA Batteries (R03)
  • 2-Year Onkyo Limited Warranty

Editor's Notes

Written by johnny_miller | Staff
  • This offer matches a +604 Frontpage Deal from last month.
  • Our research indicates that this deal is $150 less (20% savings) than the next best available price from a reputable merchant with prices starting from $749.99 at the time of this post.
  • Rated 4.7 out of 5 stars based on 30+ Adorama customer ratings.
  • Please see the original post for additional details & give the forum comments a read for helpful discussion.

Original Post

Written by iconian | Staff

Community Voting

Deal Score
+158
Good Deal
Bad Deal

Price Intelligence

Deal History

Sale Price
Slickdeal
  • $NaN
  • Today

Top Comments

Community Reviews

The TX-NR7100 is a 9.2-channel AV receiver that stands out for Dirac Live at no extra charge, newer HDMI features, and enough processing to move a system up to 5.1.4. It also has analog video inputs, two sub outputs, and a feature set that feels strong for the price, especially for gaming and home theater setups. The main cautions are its limited subwoofer integration compared with pricier models, the lack of full pre-outs and Bass Control, and reports of low-impedance and long-term reliability concerns. It is a capable midrange receiver if those tradeoffs fit your system.

  • Movie and TV listeners who want a neutral-sounding speaker setup, because the receiver pairs well with less bright speakers and reduces ear fatigue.

  • Home theater upgraders adding height channels, because it can move a 5.1.2 setup to 5.1.4 without replacing existing speakers.

  • AVR buyers who want included room correction without paying extra, because Dirac is built in at no extra charge.

  • Gamers and legacy-video setups, because it includes newer HDMI specs plus analog video inputs for older sources.

  • Listeners who need independent subwoofer outputs and bass management, because the two sub outputs are mono-parallel and lack Dirac Live Bass Control.

  • People who want a receiver that can be expanded later with pre-outs, because it lacks the preamp flexibility that supports future growth.

  • Owners of low-impedance speakers, because the receiver can run out of steam with 4-ohm loads.

  • Quiet-room calibration users, because setup can stall when ambient noise is too high.

Common Questions (5)

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

54 Comments

Sign up for a Slickdeals account to remove this ad.

Yesterday 8:42 PM
3.3K Comments
Joined Dec 2009
shaddaiYesterday 8:42 PM
3.3K Comments
Quote from sabersun View quoted comment :
Hello, I currently run an old Denon AVR-E200 and upgraded my speakers to 4ohm Martin Logan with RSL 10s MKSII. I feel the E200 is running out of steam and I would like to upgrade. I think it runs a 75W. My setup would use the eARC or Digital Audio input to get the audio to the receiver. Most HDMI will go to the TV first. My room is not that big and I have a slight bass zero at the couch. Maybe I will need a second sub out to fix that?

After my initial research I leaned toward the Denon X2800h and against the RZ30 and RZ50 due to their HW problems. Now this offer comes along for the NR7100 which seems to sit below the RZ30/50? Anyone has some insights on reliability on the 2800 and 7100, maybe a recommendation, too?
The 7100, RZ30, and RZ50 all have the same low impedance issue. You're more than welcome to try the 7100 since you are able to articulate that your current AVR has run out of steam (and folks think the limp mode is a myth). Your best bet would be to look for a 3800 but that's more money.

The 2800 hasn't been tested on ASR but the 3800 has and it does fine under 4 ohms.
1
Yesterday 8:56 PM
13.5K Comments
Joined Jul 2010
supermanrobYesterday 8:56 PM
13.5K Comments
Quote from sabersun View quoted comment :
Hello, I currently run an old Denon AVR-E200 and upgraded my speakers to 4ohm Martin Logan with RSL 10s MKSII. I feel the E200 is running out of steam and I would like to upgrade. I think it runs a 75W. My setup would use the eARC or Digital Audio input to get the audio to the receiver. Most HDMI will go to the TV first. My room is not that big and I have a slight bass zero at the couch. Maybe I will need a second sub out to fix that? After my initial research I leaned toward the Denon X2800h and against the RZ30 and RZ50 due to their HW problems. Now this offer comes along for the NR7100 which seems to sit below the RZ30/50? Anyone has some insights on reliability on the 2800 and 7100, maybe a recommendation, too?
Well this falls under the same "clone" category as the RZ50/RZ30.
So likely falls under the same HW problems.

Assuming you only need 7 channels.
I would suggest looking for a used/refurb.
You can likely find a 5+ year old(or newer) for less.

If it's a Denon, use A1EVO, you have the included Dirac equivalent!
Last edited by supermanrob November 15, 2026 at 02:24 PM.
1
Yesterday 9:24 PM
163 Comments
Joined Dec 2006
gyver65Yesterday 9:24 PM
163 Comments
Quote from Ramen4Life View quoted comment :
Does the speaker setup mic that comes in the box work for the Dirac calibration someone above said is included, or do people end up buying a separate mic for it?
Yes it does. I have tried the calibration a couple of times but never finished since I could not get my house to shut up. Too much noise! I need to find a time at my house with time alone which is hard to do. I'm looking forward to that time.
Yesterday 11:08 PM
13.5K Comments
Joined Jul 2010
supermanrobYesterday 11:08 PM
13.5K Comments
Quote from Ramen4Life View quoted comment :
Does the speaker setup mic that comes in the box work for the Dirac calibration someone above said is included, or do people end up buying a separate mic for it?
Yes it does.
Some people choose to buy a umik to use for the on line program for more accurate performance.
Today 12:11 AM
13.5K Comments
Joined Jul 2010
supermanrobToday 12:11 AM
13.5K Comments
Quote from shaddai View quoted comment :
The 7100, RZ30, and RZ50 all have the same low impedance issue. You're more than welcome to try the 7100 since you are able to articulate that your current AVR has run out of steam (and folks think the limp mode is a myth). Your best bet would be to look for a 3800 but that's more money.The 2800 hasn't been tested on ASR but the 3800 has and it does fine under 4 ohms.
If you mean the actual "folks"(owners) for the last 5 years and counting, yes complete "myth".
I for one, can attest to not hearing the issue, on several units.

Even in these post, someone pointed out this has received 600+ upvotes.
Several owners didn't mention the issue, quite the opposite.
Today 12:28 AM
383 Comments
Joined Jan 2009
thehomezToday 12:28 AM
383 Comments
Quote from supermanrob View quoted comment :
This is more a downgrade imo.

The 4300 has the same processing & power as the RZ50.
You have two independent sub outs & Sub EQ HT.
Even the RZ50 only has mono sub outs.

You lose sub/bass RC/integration with this(& RZ50,RZ70), you don't with the 4300.

You have access to A1EVO for free.
Since you don't need pre outs(but have them anyways).
You have pretty much the same sonic performance as the RZ70 ime.
Thank you so much for this information and advice. Much appreciated. Didn't realize it was that much of a downgrade. Only reason I was even thinking of upgrading was bc I'm trying a HDMI 2.1 TV but I'm looking at the Sony Bravia 8ii and will use it to run Google TV so with the eARC I should be still able to use the denon 4300h

And I didn't know about A1EVO. I did audyesse calibration but I'll have to check it the a1evo. Thanks again, repped!
Today 12:29 AM
198 Comments
Joined Mar 2015
Starscream615Today 12:29 AM
198 Comments
I've had this since it launched. Except for having to set the hdmi ports to either 4k or 8k, standard or enhanced, it's pretty great

Sign up for a Slickdeals account to remove this ad.

Today 5:22 AM
1.6K Comments
Joined Dec 2008
bcm00reToday 5:22 AM
1.6K Comments
Not a great price...paid less last year for my Integra DRX-3.4.
Pro
Today 7:11 AM
7.9K Comments
Joined Sep 2014
CTRL-ALT-DEALS
Pro
Today 7:11 AM
7.9K Comments
Quote from CSOCSO View quoted comment :
Not a bad deal but I sold mine after 1 month. Didnt realize how important would be to have pre outs, independent sub outs and support for Dirac Live Bass Control. You can have all that for a few hundred dollars more. (Rz30)
As a Denon AVR-X4700H owner, the pre outs are overrated. If I could do it again, I'd get this and save $$$

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!