Did this coupon
work for you?
work for you?
Product Name: | Low-Ambient 12,000 BTU 1 Ton 19 SEER2 Ductless Mini Split Wall Mounted Inverter Air Conditioner with Heat Pump 208/230V |
Product Description: | Experience instant relief the moment you enter your room with Pioneer's latest Diamante series high-wall ductless mini split heat pumps. This all-new product line was designed and developed to bring a truly affordable heating and cooling solution without sacrificing desirable features. The variable-speed inverter technology and high-efficiency 19 SEER2 average rating guarantees substantial savings from your monthly energy bill. A dual-swing louver system ensures both horizontal and vertical sweeping air throw, to perfectly reach all directions of the room. All systems in this series come equipped with an auxiliary strip heater in the condensing unit, to provide hyper-heating even in frigid -13°F temperatures. And with noise measurements as low as 27 dB, you can sleep peacefully with air conditioning quieter than even an empty library. In addition, all systems come pre-packed with a full 16 ft. installation kit, so your ductless mini split heat pump system is ready to be up and running in a single afternoon. Browse our newest selection of wall mounted Diamante split systems today! |
Product SKU: | 326231266_326231266 |
UPC: | 810102181510 |
The link has been copied to the clipboard.
81 Comments
Your comment cannot be blank.
Sign up for a Slickdeals account to remove this ad.
It's identical (only difference is lineset insulation is cheap). Documentation on generic stuff is lacking and incorrect a lot of times. Heated with no issue when -8F last winter.
Talking about windows....
I installed three of these into windows on a 3 floor townhouse. Screwed the bracket to the frame, ran lineset and power through windows, ta da!
And since it's temporary, you can take it with when you leave with no holes in the wall.
Talking about windows....
I installed three of these into windows on a 3 floor townhouse. Screwed the bracket to the frame, ran lineset and power through windows, ta da!
And since it's temporary, you can take it with when you leave with no holes in the wall.
120V available, too.
Cheaper at $436 on HD
https://www.homedepot.c
Not hard at all
Talking about windows....
I installed three of these into windows on a 3 floor townhouse. Screwed the bracket to the frame, ran lineset and power through windows, ta da!
And since it's temporary, you can take it with when you leave with no holes in the wall.
Wait what?
Sign up for a Slickdeals account to remove this ad.
I installed a similar pioneer unit last year using this to evacuate the lines and it worked great.
https://www.homedepot.c
https://www.homedepot.c
That's not what evacuating means. Evacuating means pulling a vacuum on the system/lineset to less than 500 microns. Moisture(yes, even the humidity in the air) is not good for your system. As the moisture passes over the compressor windings some sciencey electrolysis stuff happens causing acid eventually eating up the insulation on the windings. Hopefully these things come with a drier to help catch what you missed. A pressure test is also better than a vacuum test. A pressure test with nitrogen will get you to operating pressures(350+psi) where a vacuum test is the equivalent of something like -16psi. A micron gauge can help with this a bit but I've had leaks show up at 275psi that weren't present at 225psi.
https://www.homedepot.c
Are they hard to install? Or can I watch a YouTube video?
Sign up for a Slickdeals account to remove this ad.