Original Post
Written by
Edited March 1, 2024
at 07:56 AM
by
Walmart has SKIL 15 Amp 10'' Corded Electric Table Saw with Folding Stand (TS6307) for $269 which is savings of $30 compared to the MSRP of $299.
Shipping is free, 90-days returns and 3 years warranty after registration within 30 days of purchase on Skil's website.
Product details
The SKIL TS6307-00 10 Inch Jobsite Table Saw has a 25-1/2" (64.77cm) Rip Capacity and is equipped with a 15-Amp motor, integrated foldable legs, rack & pinion fence rails, and a dust port elbow to keep your jobsite clean. The 15-Amp motor quickly rips through hardwoods with ease, while the rack & pinion fence rails make fence adjustments fast, smooth, and accurate. With its 0-45? bevel capacity, the quick release lever allows for cuts between two positive stops at 0 and 45 degrees, and its 4x4 cutting capacity allows for swift 90-degree cutting. The integrated foldable legs seamlessly form into a folding stand to provide portability and convenience, while the dust port elbow systematically redirects dust to a container for easy cleanup.This large coated cast aluminum tabletop saw comes equipped with a 10", 24-tooth carbide blade. The parallel blade alignment allows for ease of blade adjustment along the rip fence and miter slot, for precise accurate cuts. This table saw features a safety anti-restart switch in case of outages.
- RACK AND PINION FENCE RAILS – Ensures fence stays parallel to blade for fast, smooth, and accurate cuts
- INTEGRATED FOLDING STAND – Legs quickly fold in to provide portability and convenient storage
- PARALLEL BLADE ALIGNMENT – Available micro-adjustment of blade so that it is parallel to rip fence and miter slot
- 4x4 CUTTING CAPACITY – Cuts material up to 4x4 at 90 degrees
- -2-47° BEVEL CAPACITY – Cuts between two positive stops at 0 and 45 degrees with quick release lever
- DUST PORT ELBOW – Redirects dust to a container for easy cleanup
https://www.walmart.com/ip/SKIL-1.../815617339
40 Comments
Your comment cannot be blank.
Featured Comments
Still runs great and still happy with my decision on in. I really like the foldable legs for storage and transport.
https://www.amazon.com/dp/B08F9RFJ2K
If you plan on using the credit, it's roughly $15 cheaper, since you're paying tax on the $299. Just another option for those with Amazon credit or gift cards.
Promotion Terms
Offer only applies to products sold by Amazon.com or Amazon.com Services LLC (look for "sold by Amazon.com" or "sold by Amazon.com Services LLC" on the product detail page). Products sold by third-party sellers or other Amazon entities will not qualify for this offer, even if "fulfilled by Amazon.com" or "Prime Eligible".
Promotional credit will be automatically added to your account 30 days after shipment. At that time, you will receive an e-mail from Amazon that indicates the dollar amount of the promotional credit and that the dollar amount of the credit has been added to your customer account. The e-mail will also provide instructions on how to redeem the promotional credit.
Promotional credit expires at 11:59 p.m. (PT) on 6.29.24.
Offer does not apply to digital content.
Offer good while supplies last.
Shipping charges and taxes may apply to the full value of discounted and free promotional items.
Items must be purchased in a single order and shipped at the same speed to a single address.
Offer limited to one per customer and account.
Offer may not be combined with other offers.
The maximum benefit you may receive from this offer is $50.
Amazon reserves the right to modify or cancel the offer at any time.
Offer is non-transferable and may not be resold.
Offer discount will be allocated proportionally among all promotional items in your order.
If any of the products or content related to this offer are returned, your refund will equal the amount you paid for the product or content, subject to applicable refund policies.
If you violate any of these terms, the offer will be invalid.
Unless an Amazon Gift Card is the stated benefit of the promotion, promotional codes (including those placed directly in accounts) may not be redeemed for Amazon Gift Cards.
Sign up for a Slickdeals account to remove this ad.
Brand new Ryobi table saws are not good. The fences are wobbly, pain to keep straight, can cause binding and put you in dangerous situations. I also don't trust the bevel angle indications.
*Edit: this must be an updated version as the riving knife is removable. Mine might be an earlier version with a non removable riving knife.
The riving knife is definitely removable, you are supposed to remove it when using a dado stack.
Sign up for a Slickdeals account to remove this ad.
It's a jack of all trades 1) 10" blade 2) Legs - also foldable 3) All Metal 4) Portable 5) Dado Blades 6) Large cutting capacity 7) Solid Price
They must have updated it then. As I have this model and the riving knife is 100% not removable. It was a con for many YouTubers reviewing it, and the manual says to adjust the riving knife to its lowest position when using a dado. It could be modified to be removable but I haven't really found a need to do that yet.
Also from what I understand these originally had a plastic throat plate, later updated to a metal one. (The one I have is metal.)
Also from what I understand these originally had a plastic throat plate, later updated to a metal one. (The one I have is metal.)
Ah, yeah mine is plastic and prone to warping but I haven't had that happen to mine and I've owned it about 2 years.
That's cool they updated it and didn't raise the price. It was $299 back the too.
Sign up for a Slickdeals account to remove this ad.
That's cool they updated it and didn't raise the price. It was $299 back the too.
My throat plate is metal too so I must have the newer revision, I never use it. The gaps between it and the blade are way too large, so I just use a wooden zero clearance insert I made, and a wooden tighter clearance insert for angle cuts.
I tapped some steel screws into the ledges the factory insert rests on, so I could adjust for flushness with the table, and also use as points for the magnets in my wooden inserts to hold onto. Also have a screw threaded into the end of the wooden inserts to ensure they can't lift up.